Sponsored
Graco TriRide 3-in-1 Convertible Car Seat
In Stock
At a glance
Sponsored
About this item
Highlights
- 3-in-1 car seat grows with your child from rear-facing harness (5-40 lb) to forward-facing harness (26.5-65 lb) to highback booster (40-100 lb)
- Graco ProtectPlus Engineered to the newest testing standards for side impact and beyond—because the safety of your child shouldn’t stop at the standard
- No-Rethread Simply Safe Adjust Harness System allows the headrest and harness to adjust together in one motion
- Choose the perfect headrest height from 10 positions to get the safest fit for your growing child
- 6-position recline keeps your child comfy and helps for a better installation
- Harness storage compartment keeps the harness safely stored while in belt-positioning booster mode
- Open-loop belt guides help properly position your vehicle’s seat belt in highback booster mode
- 2 easy-to-clean cup holders keep your child's drinks and snacks close at hand
- Side-impact tested according to FMVSS 213a with the built-in 5-point harness system
Description
Shipping details
Return details
Q: What type of latches are with these carseat? Is it the seatbelt buckle type or the older type that feel impossible to unhook when removing the carseat from the car
A: The ones that hook and are practically impossible to remove. Grayco should have had the click type
submitted byBbilt - 1 year agoA: The hooks you hook in the seat
submitted byAlexis - 1 year agoA: Thank you for your interest in our products! The TriRide 3-in-1 Convertible Car Seat has a j-hook LATCH system. We hope this helps! - The Graco Team
submitted byGraco Consumer Care - 1 year agoBrand expert
Q: can this be used/installed in rear-facing mode using only car seatbelt in a car without isofix? I tried another car seat and it was only possible to use in forward-facing mode.
A: Thank you for your inquiry! The TriRide 3in1 car seat is designed for installation using your vehicle's latch system or the vehicle seat belt for ease of installation. Hope this helps! -The Graco Team
submitted byGraco Consumer Care - 2 years agoBrand expertA: Yes, we used it for rear-facing when my granddaughter was little. It’s held in place safely with the car’s seat belt.
submitted byHappy - 3 months agoA: I also had this issue with another convertible seat. And the anchor belts just didn't seem secure. Looked like it was held on by a small piece of plastic. Hoping this seat is better.
submitted byJvassar - 1 year ago
Q: If i have an older car that doesn't have the latch hooks, could i still use this carsest?
A: You can use the seatbelt but you will need the anchor hooks for forward facing.
submitted byAmgonyea - 6 months agoA: Thanks for your interest in our products! Yes, the car seat can be installed using the seat belt. We hope this helps! Graco Team
submitted byGraco Consumer Care - 7 months agoBrand expert
Q: We use turned the car seat around to forward facing. We are having a hard time pulling the strap to tighten the harness when our child gets buckled in. Are we doing something wrong?
A: We have the same issue! It feels like we are going to break our wrists just to tighten the strap to fit our toddler. We will have to get a different carseat because there is no way the grandparents can tighten the straps enough.
submitted byLeanne - 8 months agoA: Thank you for your feedback! We’re so sorry to hear that you've experienced trouble with your TriRide 3in1 Convertible Car Seat and we would be happy to see how we can help! Please reach out to our Consumer Care Team at 800-345-4109, M-F 9am-5pm EST. Thanks again! - The Graco Team
submitted byGraco Consumer Care - 9 months agoBrand expert
Q: Does this have the red push-button latch connectors, or just the hooks?
A: It has the red push button latch connectors
submitted byKmc - 1 year agoA: Thank you for your interest in our products! The TriRide 3-in-1 Car Seat has a J-hook LATCH system. We hope this helps! - The Graco Team
submitted byGraco Consumer Care - 1 year agoBrand expert
Q: Can this be used with the same base that came with the Graco Snugride 35 lite?
A: No, this is a convertible car seat, it stays buckled into the car, no base.
submitted byKayla H - 1 year agoA: Thank you for your interest in the TriRide 3-in-1 Convertible Car Seat! Infant Car Seat Bases are not compatible with Convertible or All-in-One Car Seats. The TriRide 3-in-1 Convertible Car Seat has a base that is built into the bottom of the seat. We hope this helps! - The Graco Team
submitted byGraco Consumer Care - 1 year agoBrand expert
Q: what is the width of the car seat... trying to fit 3 seat in back seat. is there another one you recommend that can be narrower? looking for rear facing for 2 year old converting to forward facing.
A: Thank you for your inquiry! The width of the Triride 3in1 Convertible Car Seat is 19 inches. We hope this helps! - The Graco Team
submitted byGraco Consumer Care - 3 years agoBrand expertA: Graco slim fit are narrower!
submitted bySan - 3 years ago
Q: looking for a FAA Regulated car seat to bring on the airplane for a 1 yr old weighs 35 lbs Is this suitable?And Is the base attached?
A: Yes the base is attached. And in the manual it states "This child restraint is certified for use in aircraft only when used with the internal harness system. Use only on forward-facing aircraft seats."
submitted byK - 5 years agoA: Thanks for reaching out! The Graco TriRide 3in1 Convertible Car Seat will accommodate your little one rear facing at 1 year old and 35 lbs, rear facing use can begin at 5 lbs up to 40 lbs. This seat can be used in an aircraft when the 5 point harness is being used. Due to the weight and grow with baby features, the base is integrated into the seat. We hope this helps!
submitted byGraco Consumer Care - 4 years agoBrand expert
Q: do all Graco car seat hook to same base in car
A: Thanks for your interest in the TriRide 3-in-1 Convertible Car Seat! This seat has a built-in base that isn’t removable and is designed to stay installed in your vehicle. If you’re looking for a seat with a detachable base, check out our Infant Car Seats, they allow you to remove the car seat from the base and attach it to another Infant Base for added convenience. We hope this helps! - The Graco Team
submitted byGraco Consumer Care - 14 days agoBrand expert
Q: Hello, can this be attached to graco strollers?
A: Thanks for your interest in our products! The TriRide 3-in-1 car seat is not compatible with Graco Strollers. Graco Team
submitted byGraco Consumer Care - 16 days agoBrand expert
More to consider
Discover more options
Related Categories
Save this as last option
(no review title)
Great car seat! definitely recommend!
Would recommend
Buyers Beware
1 reply from Graco Consumer Care team - 7 days ago
(no review title)
1 reply from Graco Consumer Care team - 9 days ago
Infant to Booster
Love it got it for my grandson
Car seat for grandchildren
(no review title)
Best purchase
bad customer experience
1 reply from Graco Consumer Care team - 26 days ago
(no review title)
(no review title)
(no review title)
(no review title)
(no review title)
(no review title)