Graco SlimFit 3-in-1 Convertible Car Seat

A: Thanks for your interest in our products! The Slim Fit 3 in 1 can be installed using the inright latch system, or the seat belt of vehicle. We hope this helps! Graco team

A: Thank you for your interest in our products! Our SlimFit 3 in 1 car seat is 25.5'' H x 21.5'' D x 19.9'' W. If you need help installing your car seat, please reach out to a local certified Certified Child Passenger Safety Technician (CPST) for assistance. This is a free service, one can be found in your area at: https://www.nhtsa.gov/equipment/car-seats-and-booster-seats#inspection-inspection We also have CPSTs available to help if needed, please contact us at 800-345-4109 Monday-Friday 8:00-5:00 EST and choose option 2.

A: I use 2 of these in the back of my Dodge Challenger that has headrests that don't come out and i just go over them and it works fine.

A: Are you sure they’re definitely fixed? We have the same issue in our Sienna and there is a tiny keyhole slot on the side of the base (the base where the pins slide in). If you stick something in there they come out completely. I used a kabob skewer but a small flathead screwdriver might work.

A: It would probably be easiest to have two of them, but that's not financially feasible for everyone. I will eventually be buying 2 so we don't have to worry about switching between cars. It's really just personal preference.

A: Thanks for reaching out, we appreciate your interest in our products! Due to the grow-with-baby features, the SlimFit 3-in-1 Car Seat doesn't have a removable carrier or separate base. This seat can be installed using your vehicle seat belt or the included InRight™ LATCH system. We hope this helps!

A: I found it easier to purchase a second car seat for my 2 cars. The struggle of constantly moving the seat is not worth it.

A: How can we request a car seat purchased after 6/30/25 as opposed to one manufactured before this date?

A: Thank you for your inquiry! Parents and caretakers may check the manufacturing date of the car seat to determine if a Graco car seat meets the new side impact rules. All car seats (excluding belt-positioning boosters) manufactured after June 30, 2025, pass testing to these new standards. All Graco car seats manufactured before this date have undergone rigorous side impact testing to our internal standard and are safe and meet all the regulations and standards active on the manufacturing date. We hope this helps! - The Graco Team

A: Thanks for reaching out! The safety of our products and the consumers that use them is our greatest priority. As a juvenile products manufacturer we are subject to strict regulations including a requirement for car seats to meet the US mandatory federal flammability requirement for the interior of vehicles. We can confirm Graco Seat products do contain a flame retardant additive in order to meet this flammability requirement, and that any flame retardant additive utilized in our products meets or exceeds relevant regulatory standards. Graco Team

A: Thanks for your interest in our products! This child restraint is certified for use in aircraft only when used with the internal harness system. Graco Team

A: Thanks for your interest in out products! All of the SlimFit 3 -in -1 Convertible car seats have removeable infant head support pads. -Graco Team

A: Thank you for your interest in our products! All of our car seats will fit in most US vehicles. Our SlimFit™ 3-in-1 Car Seat has a width of 19.88", height of 25.5" and a depth of 16.25". We hope this helps! Graco Team

A: Thanks for your interest in our products! The Graco SlimFit 3-in-1 Car Seat in Jarrett and Camelot are essentially the same model with identical features, but they differ in color and fabric design.- Graco team

A: Thanks for your interest in our products! The SlimFit 3-in-1 Convertible car seat does not fit 3 across in a standard car. Graco Team