Metabo HPT NT65MA4M 15-Gauge 2-1/2 in. Angled Finish Nailer Kit

The NT65MA4 15-Gauge angled finish nailer is the ideal nailer for installing crown and base moldings, window and door casings, chair rails, cabinets, exterior trim and staircases. Its compact body and angled magazine make for easier placement and operation in tight angles. The integrated air duster clears debris from the work site allowing for faster and cleaner job completion. The NT65MA4 accepts 15-gauge nails from 1-1/4 in. up to 2-1/2 in. in length. Selective actuation switch allows for either sequential or contact nailing with a simple flip of the switch, no tools or parts required Integrated air duster can be used to clear away dust and debris from the work surface in preparation for nailing or gluing Tool-less easy to clear nose for quick nail extraction should a nail jam during use Tool-less depth of drive dial adjusts for flush fastening into varying materials for improved control and a professional finish At only 4.2 lbs., this finish nailer minimizes user fatigue, while increasing maneuverability 360 degree fully adjustable exhaust portal directs air exhaust away from the user or work piece 34 degree magazine angle allows the user to reach into corners or tight spaces with ease No-mar tip protects the work surface from damage and can be removed if not needed Rubber grip adds comfort and a secure hold Accepts 15-Gauge nails ranging in length from 1-1/4 in. to 2-1/2 in. Factory installed air fitting is angled upwards to keep the compressor hose conveniently out of the way of the user and work piece.