Monoprice 3-Prong Power Cord - 1 Feet - Black | NEMA 5-15P to IEC 60320 C13, 18AWG, 10A, 125V

A: Hi, thanks for reaching out about Monoprice 3-Prong Power Cord - 1 Feet - Black | NEMA 5-15P to IEC 60320 C13, 18AWG, 10A, 125V The power cord for the PS4 Pro is actually different depending on which model revision you own. There are two main types of power cables used by the different PS4 Pro revisions (models): 1. The IEC C17 Connector (Older/Launch Models) This connector is an ungrounded version of the standard "PC/Monitor" or "Kettle" cord. Appearance: It is typically a 2-prong connector with a flat, square/rectangular shape. It's often wider and bulkier than the C7. Used On: The original launch and first revision models of the PS4 Pro (specifically the CUH-70xx and CUH-71xx series). Note: Although it's technically a C17, it's physically compatible with a standard 3-prong grounded IEC C13 "Kettle" cord (like the one for a PC power supply). The ground pin will simply not be used, but the cable will plug in and work. 2. The IEC C7 Connector (Newer/Slimmer Models) This connector is commonly known as a "Figure-8" or "Infinity" cord. Appearance: It is a 2-prong connector with a rounded, figure-eight cross-section. It is much smaller and slimmer than the C17 connector. Used On: The latest PS4 Pro models, primarily the CUH-72xx series (often found in newer bundles like the Red Dead Redemption 2 or Death Stranding console). Compatibility: This is the same type of cord used by the PS4 Slim, PS5, many Xbox models (Series S/X, One S/X), and various modern TVs and audio equipment. How to Check Which One You Have The easiest way to know for sure is to look at the power port on the back of your PS4 Pro: If the port is wide and flat/rectangular, you need the IEC C17 (or a standard 3-prong PC C13 cord). If the port is a small, rounded figure-eight shape, you need the IEC C7 cord. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.