Mount-It! Heavy Duty Monitor Desk Mount w/ USB & Multimedia Ports

What would have been a great product ruined by too short of cables. I had in my head these would be 6ft, which maybe they are, but they are too short to reach the back of my computer. My computer is maybe 4ft away. With routing + ~2.5ft. I even bought and installed a separate USB 3 connector that links to my motherboard and slots as a PCI. Once the mount was here, I discovered my only options would be to move the mount 2ft from where I'd planned to install it or plug in the 2 USBs + 2 3.5mms on the front ports of my case... neither ideal, I went with the first, and I'm still thinking about returning it. The mount itself is good. Very strong gas strut that easily supports my monitor. At the time of purchase I had a 27" and was looking at 32s. I ended up buying a 34" ultrawide since I knew it would fit -- 13lbs so this mount's not even stressed. I also considered putting a TV on it as I was looking at 43" screens at the time. Went with larger that do not support 200x200 bolt pattern so can't really do that.. All in all I give it 4 stars. It would have been 3 but it does look fairly sleek and I'm not super worried about it dropping my monitor. A few other complaints: lifting it up is heavy -- takes quite a bit of initial force to get it to rise (but I may have the gas strut a little too tight). The 'tilt' on it isn't like the rest of it -- I can move the monitor freely in every direction except tilt -- for that you'll need to use a supplied alan wrench to adjust. Not a huge deal, just annoying. It also uses a plastic clip to affix the monitor to the mount. While I'm not *super* worried about this, as another reviewer pointed out it's a little unnerving. Definitely a weak point of the monitor mount and a critical one at that. Cable management is good. I recommend NOT using stiff cables if you plan on using this: stiff cables can tear out your monitor ports so buy flexible ones and possibly right angle adaptors. I plan on purchasing a couple of short HDMI extensions I can route through the provided spaces and connect just beyond the base. I also went non-standard with the instructions, pivoting the base receiving sleeve to the front; it doesn't look as polished but it *does* allow more range in movement whereas the standard install (with it off to the right, as seen in the pictures) cuts your ability to swing the monitor all the way to the left because it collides with the base bar at a ~45 angle. Much preferred and wish this was the default setup (with sleeve hardware hidden in back). All in all 4-star monitor stand. Could have bought one ~40% cheaper even from this same company to do the same job, but I wanted the ports and extra weight. 8-10ft cables would have made it much better and easily made the stars 5.

Works great and holds up my LG 38WN95C monitor with no problem it also extends a great distance for when I want to be able to use my monitor and still be able to see my tv at the same time. also the extra USB ports definitely come in handy and for anybody wondering my monitor doesn't shake or anything when I bump up against my desk so that's great also I would definitely recommend this mount.

I purchased the MI-4771 specifically because it seems be the only monitor arm out there capable of handling my LG-43UD79-B monitor. The arm is well built, solid. The desk clamp is quite impressive, I am happy it uses bolts rather than just thumb screws so you can really tighten it down well. Mounting the monitor took a little bit of work, the extensions that allow for 200mm mounts flare out a bit too much at the end so I needed to trim some of the plastic ribbing on the monitor for it to fit. The only bit I am not 100% happy with is the quick release on the mounting bracket. Where the bracket mounts to the arm is a nylon/plastic block that locks into place at the end of the arm. The nylon block however is affixed to the bracket with only two screws, this seems like a weak point because with the monitor mounted, there is rotational play at this point regardless of how tight you try and get the screws. If this mounting block was metal rather than nylon the monitor would feel more secure.

Great mount, works as advertised. Good price and fast shipping!

I bought 2 for my 34 inch dell monitors (19 lbs) and it works perfectly! Was not hard to setup either. Would come here for any other mounting needs in the future.

I'll keep it short. Everything about this product is perfect, except the following two minor items: 1. The USB hub at the base has shallow ports, which cause protruded and loose connections while plugged-in. 2. The plastic back-plate behind the base (that has slots for the Hex wrenches to sit in) pops out easily. I wish it was of higher quality and more secure, so that stuffed cable overflow would stay put when routed through there. Oh, and they're made in China. With those things in mind, I'm giving this 5 stars. Quality product!