Mount-It! Single VESA Monitor Mount | Vertical Monitor Desk Stand | Telescoping Pole Height Adjustable | Fits 19 - 30 Inch Computer PC Screens

Specifications say it can handle up to 33lbs, but the monitor was only 26lbs and it failed. I got this for my 49" ultrawide monitor. The screw that locks in the tilt of the monitor was not strong enough to stop the screen from tilting down. It may work with a lighter/smaller monitor, but it does not with the ultrawides.

Needed this to add a second monitor above my lap top for Zoom rehearsals. With a 23" screen mounted, my lap top just fits underneath.

This makes my desk setup look super clean i love it! Just what i needed

I've been using 2 of these to mount two different monitors. Make sure your have vsea mounts on whatever you want to mount. The very smallest the clamp goes is about 1\ or 1 1/2\" so if your desk isn't that large then just put a thick cardboard piece between the clamp and the desk. It's not considered the safest option but it gets the job done. I've had mine on for a good 3-4 months like that and there's no sign of the monitors slipping from the desk. Make sure to really REALLY tighten the clamp on first installation.If you can spend the extra couple dollars

I used this to put a monitor above an existing laptop. I was able to make it work but I wish it had been able to extend about 2\ higher. It's very well made and easy to use. For normal-height usage

Referring to my headline, that's all I cared about; being able to hold my giant 35 wide screen monitor from Acer. It does, and it does t well. Note: it's a bit difficult getting the screen pivot angle adjustment proper with just one person, especially with a heavy monitor. Recommended as a two person install to keep your monitor from slipping and damaging something

I am sure item is well made and works well. However, WARNING: the description which says this will work with \any desktop\" is WRONG. The clamp requires a desktop with a overhanging ledge of at least 2.5\" or so. Because my ledge is only 1\"

Easy to install, secures firmly to a desk but I had to add a spacer for it to fully clamp on a desk that was 3/4\ thick. There is some tilt adjustment but not much so don't plan on using it for that purpose. It seems to tilt down more than it tilts up

PROS:+ Very sturdy monitor mount: it can easily handle the weight of a 30-32\ display.+ Solid construction

loved it . can use it anywhere including my kitchen

Using this for my multimedia setup. Holding up extremely well.

Not much to say, other than it's a good budget monitor stand. I was dumb and didn't do any measurements it ended up being too loose to clamp onto my desk, but luckily I had a random piece of wood laying around which allowed me to be able to actually use it. It's made out of metal, and it seems very sturdy. You can tilt it right and left (if you wanted to), and you can raise the monitor up and down to get the perfect height (which I constantly argue with myself about). The only thing I'd want improved is how fine you can get the clamp, so people like me with smaller desks don't need to improvise in order to use it. This was an absolute necessity for the monitor I got, you can't adjust the stand and it's default position is pointing at my chest.

Not together obviously but holds them well. Great product

Received quickly and well packaged. Installed quickly and very sturdy and well built. Great product would definitely recommend it.

Pros:- Easy to mount on the table.- Sturdy. Very sturdy. Even when pushing the table purposely, my monitor still wouldn't wobble.- VESA mount has two different options for your monitor. So it should be able to hook up no problem.Cons:- Doesn't rotate. Makes plugging cable in difficult- The clamp. You have to make sure that your table's got enough girth to be able to clamp this on. I couldn't put this on my old Ikea desk because of how thin the table was. I had to put a small piece of wood under the table so that I can latch this on.- This doesn't have an arm. So you can't move the monitor around like you can with the other 3rd party monitor stands.Other thoughts:I like it. But I think I'm gonna go back to my monitors original stand. I just a monitor "arm" and this one doesn't have it. It's stuck in one place and I can't have that.

Mostly seems to be a good monitor stand. I can't get the monitor quite level as there is something in the design that is allowing the monitor to tilt to one side. It's pretty irritating that I'm considering getting a refund.

perfect to go with our industrial application on the media cart

I bought this stand for my new 35'' ultrawide monitor to get it farther back on the table. 50 Centimeters deep, the table was definately too narrow for a screen this size.My tables back is L shaped so this mount was perfect because you can unscrew the clamp. So I drilled four holes to my desk and used the old clamp as a backplate. So far so good. Only problem is that the security knob of the vesa mount can barely hold the screen in place because of the weight.

It doesn't raise the monitor very high at all. Tilting up and down is not possible if your monitor is heavy. Sturdy strong base. Great product for the price.

The product feels pretty hefty and well built. The unit I received did, however, have an awkward thumb screw. It didn't screw in very tightly and was quite difficult to get on properly. Vertical tilt adjustment is also a bit tedious. For the price, it is quite a good investment.