Monoprice Height Adjustable Sit-Stand Riser Table Desk Frame - Black With Electric Single Motor, Compatible With Desktops From 39in-63in Wide

Installed on a Ikea table top, fits perfectly!! Happy Wife Happy Life :) Thank you Monoprice!!

The single motor is plenty for a 1-1/2" maple top plus dual monitors. Does not show signs of struggle at all. This desk is also worth the extra price for the programmable heights (One for sitting, standing, and one with a balance board).

The frame width needs two people to set to match the top''s predrilled screw holes easy to use to adjust the height

It works like a charm! Great value!

So Far so good, it is not easy setting up by yourself, get some else, also the nut on one of the arms fell thew and it took 30 minutes trying to get it out, be aware, you get no spare screws or washers

Great desk, I have a heavy piece of wood, 3 monitors, and my pc on top and it still raises, even though it is slow, but that?s because I am easily 20 lbs over the weight limit. Easy assembly, a great base for a desk

Bought this since I figured a 300 dollar desk should last me quite a while. Turns out it only lasted a little over a year, which just happens to be right after the warranty expires.... Before it broke, it was great, but one day it just started beeping, and nothing I could do would change it. Tried unplugging and resetting, etc, reached out to Monoprice. They had some things to try, and then said it needed to be replaced, but it was out of warranty, so I was out of luck. Pretty bummed, as I've always had good luck with Monoprice, so this was my first time being let down by them.

For being one of the cheaper Sit-Stand Single Motorized on the market, I was really impressed with how beefy and heavy the steel frame is. The height memory buttons are a plus. Overall I think it's a great valve for anyone looking for their first Sit-Stand desk.

This is an affordable way to move to a standup deck if you already have a desk top. I already had an Ikea desk top and I was easily able to assemble the frame and attach the top.

Pretty easy to set up, and overall a great value. However, two things I haven't enjoyed: 1. At the standing height, there's a bit of wobble. It's not much, but it's enough that my monitors (attached via monitor arms to the table) jiggle just a bit when I type. It's frustrating enough that I've wedged a piece of cardboard between my desk and the wall in standing mode, which helps a bit. All bolts and screws have been tightened, and I can see the desk wobble (ie- it's not just the monitor stands). 2. The base height is pretty high. My table top is about 1.5" thick, and once assembled, at the lowest height it's a little tall for my chair. I feel like a praying mantis when I type. Your mileage may vary - make sure you measure well before purchase!

Easy to setup. It's quiet, consistent, even and smooth when moving up or down. The design is good and it is built to last. Telescoping legs are sturdy, and made of metal that is thick enough to support the weight. I worried about this handling the weight I have two large monitors, a laptop and several books weighing ~70lbs plus the tabletop, and this has no trouble whatsoever. I reused an old table top from ikea and screwed this frame onto it. It looks great, functions as expected and gives me the flexibility of standing or sitting. Price was right, highly recommended.

Really well done, especially for the money. Another great value from Monoprice.

Easy to assemble, works wonderful! All for a price below most top-mounted sit/stand devices.

Very good frame, solid, assembly was fairly straightforward. I paried it up with a pretty sweet tabletop from monoprice for what I think is a good price. The 'fun' starts after assembly. I'm not sure how good the quality control is for the control unit: 1) The only button that consistently works is the 'UP' button. The 'Down' button only works in reset mode, after I unplug and re-plug the unit. For a while actually, in reset mode, the 'Down' button would work for maybe 2 seconds, then start going up, unprompted, creating this very awkward situation where I had to unplug and replug every two seconds when I was trying to get the desk down. This resolved itself it seems. 2) Forget about getting the memory buttons working properly. 3) The height display is broken and only shows one height throughout operation (28.5'). Forget changing the units. 4) Looking at support forums, seems like the lifetime of the motor is hit-or-miss. That coupled with a 1-year warranty means that this baby is going back to manufacturer. I'd say to think long and hard before making this purchase: 1) Are you ok with full RMA (including repackaging the whole thing) if there is a technical issue with the product within the year? 2) Are you OK with essentially replacing the whole stand at your own cost if something happens, eg to the control unit, after the year? 3) Are you OK with the wasted time during these procedures? For this brand, I'd personally only recommend the hand crank, since it's easy to deal with mechanical failures. Anyway, just my .02 cents. I really really wanted this to work out, and the the assembled unit is EXACTLY what I wanted, but after having issues within a day of assembling it, I think I'll have to pony up for a more expensive and reliable vendor.

Amazing desk for the price! Super high quality and sturdy. The standing feature it super cool. It?s a new experience and I don?t think I can ever go back.

Assembly was simple, works as it should. I retro-fitted my existing desk and it fit perfectly. One thing I would change is the length of the controller wiring, I wanted to put the controller on the left side, but the wire was not long enough, and I wasn't about to take my whole desk apart to flip it around. Money well spent.

The lowest setting is still fairly high, and I was forced to raise my chair up all the way just for it to be comfortable. Feet don?t touch the ground otherwise.

I got this with the #33085 3-piece desktop. All together I love the desk, it works very, very well. Adjustment is easy with 3 memory positions; I like the deep desktop and its curved front; the cable management works great; the whole thing is sturdy and will probably last a long time. Things that could be improved are (A) The laminated desktop surface gets very smudged by fingerprints, needs wiping every day. (B) The 3 pieces of the desktop fit as well as can be expected, but no doubt I would have a preferred a single piece desktop of the same size. (C) I wish the desktop was a tad thicker, it's only 0.6-0.7 inches, laminated particle board. But these are all issues with the desktop, and still minor. The frame is pretty much perfect. All together I would choose the exact same frame and desktop again, even with the new choices available since I purchased. So I guess that must be 5 stars!

Very happy with product made my own top use it everyday. Could be cheaper.

Top Notch frame for a sit stand desk. I have been using it for about a month now, I put a super heavy chunk of butcher block as my desk top on these legs and they don't even pull a sweat raising and lowering my desk with everything i need on top of it. (I only use a few items, so I don't pile my desk too high, but I imagine it can take a lot more then I am throwing at it) quick preset buttons also work really well.