Clarity® P300™ Amplified Corded Photo Phone, White

A: Hi, thanks for reaching out about Clarity® P300? Amplified Corded Photo Phone, White. It sounds like you have a modern fiber or cable internet setup where the "landline" service is actually coming through your router/modem (VoIP). If your current phone is already plugged in and working, you likely don't need a special adapter for the Clarity P300. Here is the breakdown of why you might see "adapter" mentioned and how it applies to your 6-jack setup: 1. The "Analog vs. Digital" Gap The Clarity P300 is a traditional analog phone. In the past, if you had high-speed internet but still wanted a landline, you needed a small "DSL filter" or adapter to prevent the internet signal from making a "hissing" sound on the phone line. However, since you mentioned your router has 6 phone jack holes, you are likely using a "Gateway" that converts digital internet data into a standard analog phone signal for you. If your current phone works by plugging directly into the router, the Clarity P300 will work exactly the same way. No extra adapter needed. 2. Power Requirements The Clarity P300 is "line-powered," meaning it doesn't usually need to be plugged into a wall outlet to make a basic call. However, it is an amplified phone (up to 26dB). To use the extra loud amplification and the bright flashing visual ringer, the phone usually needs its own AC power adapter (the "wall wart" plug). This should come in the box with the phone. It doesn't plug into the router; it plugs into a standard electrical outlet. 3. Connection Check On the back of your router/modem, you'll see those 6 holes. Usually, only one or two are active (labeled Tel 1 or Phone 1). Simply take the phone cord that comes with the Clarity P300. Plug one end into the Line jack on the bottom of the P300. Plug the other end into the same hole on the router where your current phone is plugged in. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.

A: Hi, thanks for reaching out about the Clarity® P300™ Amplified Corded Photo Phone, White How to Make an Outgoing Call Lift the Handset: Pick up the receiver and listen for a dial tone. Press the Photo: Press the specific picture button of the person you want to reach. The phone will automatically dial the programmed number for you. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day between 7 am and 11 pm CST.

A: Hi, thank you for reaching out about Clarity® P300™ Amplified Corded Photo Phone, White. The Clarity® P300™ is an analog telephone and cannot connect directly to a router, but it can work with a VoIP adapter that connects to your router. It is a simple, non-expandable system. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.

A: Hi PM, thanks for reaching out about Clarity® P300™ Amplified Corded Photo Phone, White. The Clarity® P300™ Amplified Corded Photo Phone comes with a 25-foot telephone line cord. This cord connects the phone to the standard phone jack on the wall. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.

A: Hi Pauline, thanks for reaching out about Clarity® P300™ Amplified Corded Photo Phone, White This uses the telephone line for its main power source, so that it does not require a separate power cord plugged into an electrical outlet to function for basic calls. However, it does have an optional battery compartment for a 9V battery. This battery is typically used to power the visual ringer (to make it brighter) or to maintain memory (like programmed photo numbers) during a power outage. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.

A: Hi cathy, thanks for reaching out about Clarity® P300™ Amplified Corded Photo Phone in White For assistance with your purchase, you will want to reach out to our Target Guest Services team. They can be reached at 1-800-440-0680. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.