A: You've come to the right place. Rust-Oleum Painter's Touch Ultra Cover 2X Spray can be used over a latex primer. The necessity of sanding before applying this product would depend on the primer, but generally speaking, you do not need to sand. Additionally, we don't recommend sanding in between coats of this product. For the best results, we recommend applying 2 to 3 coats a few minutes apart. - Rust-Oleum Product Support 5
A: Happy to help Charl. Rust-Oleum Painter's Touch 2X Ultra Cover Spray Paint can be applied to wood, wicker, metal and plastic, it cannot be applied to glass. - Rust-Oleum Product Support 6
A: We like the way you think, Ann! Yes, Rust-Oleum Painter's Touch 2X Ultra Cover Spray can be used on pegboard. Since the surface is bare, additional coats may be needed for full coverage. - Rust-Oleum Product Support 3
A: We appreciate your interest! Due to the constant exposure to moisture and high humidity, we do not recommend Rust-Oleum Painter's Touch 2X Ultra Cover Spray Paint for use in a tub or shower. - Rust-Oleum Product Support 3
A: We appreciate your interest, Kathy! While Rust-Oleum 2X Painter's Touch Ultra Cover Spray Paint can be used on most exterior surfaces, we do not recommend it for use on surfaces that will receive foot or vehicle traffic. This product will not hold up in that type of environment and it will cause the coating to blister and peel. - Rust-Oleum Product Support 3
A: Let's talk further! Rust-Oleum Painter's Touch 2x Ultra Cover Spray does take about 7-10 days to fully cure. The longer you allow it to dry, the better just to ensure that you do not scratch the paint. It will dry to handle in about an hour so if you can give it a few days, you'll be just fine!