Sponsored
Chicco Fit360 Zip ClearTex Rotating Convertible Car Seat - Jet
New at target
$489.99
Out of Stock
Eligible for registries and wish lists
At a glance
Sponsored
About this item
Highlights
- Stage: Rear-Facing Harness (4-40 lbs.), Forward-Facing Harness (26.5-65 lbs.)
- Grows with child: 15-position easy-adjust headrest & harness, 6-position recline
- Includes: Car seat and base, 360 degree rotation, ClearTex fabrics, Dishwasher-safe cup holders, Machine-washable fabrics, Infant positioner
- Safety Features: Anti-rebound bar, Click-in attachment, ReclineSure leveling, RideRight bubble levels, LeverLock installation, Ready-to-ride indicators
- Innovative LeverLock® Self-Tensioning Lock System applies the correct amount of belt locking tension with minimal effort for a secure, one-time installation providing reliable stability over time, from rear-facing through forward-facing use
- Quick-Secure Harness System features easy-adjust headrest and harness, magnetic harness holders, magnetic chest clip and flex-forward crotch buckle for an optimal loading/unloading experience
Description
All Around Easiest – to Install, Use and Clean
The Fit360® Zip ClearTex® Rotating Convertible Car Seat is the all-around easiest-to-use car seat for everyday travel. The 360° one-hand rotation provides an optimal experience to comfortably secure your child in the seat and just as comfortably remove them when your ride is complete. The Fit360® Zip starts face-to-face for easy loading and unloading, and then turns to rear-facing (4-40 lbs.) or forward-facing (26.5-65 lbs.) when you are ready to ride.
For added convenience, Fit360® Zip features a Zip & Wash seat pad that is easy to remove for machine washing. The full-length zipper allows you to remove the entire seat pad in one piece.
Includes Fit360® Mirror
The Fit360® Mirror easily attaches to the Fit360® base, offering you a clear view to check on your baby while they are rear-facing in the back seat. The convex mirror attaches at the correct angle – no adjustments needed. The mirror is shatter-resistant and crash test approved for the Fit360® Rotating Convertible Car Seat.
Install with Confidence
Installing the Fit360® is as simple as open-route-close with Chicco-exclusive LeverLock® seat belt installation. Open the LeverLock® door on the Fit360® base and route the seat belt using the easy-access belt guides on the base. By simply closing and latching the LeverLock® door, the vehicle belt is tightened in a way that eliminates any movement from front-to-back or side-to-side. This provides secure installation with minimal effort, ensuring reliable stability over time.
Once the base is securely installed in the vehicle and the seat is attached to the base, the red or green ready-to-ride indicators found on both sides of the base clearly indicate if the seat is properly positioned (green) or not (red) for travel in a moving vehicle.
You can purchase an additional Fit360® base that can be installed in another vehicle allowing you to easily move the Fit360® seat from base-to-base.
Everyday Comfort
The ergonomic seat shell and ultra-plush seat pad support your child in a natural seated position and provide enhanced comfort as they grow. The Fit360® base is equipped with six recline positions that allow you to select the ideal seating angle during installation. Featuring ClearTex® flame retardant-free materials, Fit360® Zip ClearTex® is GREENGUARD Gold Certified for low chemical emissions, contributing to healthier air quality around your child.
Everyday Ease
The Quick-Secure Harness System features a 15-position, easy-adjust headrest that simultaneously adjusts the harness height. The flex-forward crotch buckle stays out of the way for easy child loading and magnetic harness holders keep straps and buckles contained until ready for use. The quick-secure magnetic chest clip offers easy in and out without the fuss.
Everyday conveniences include zip-off machine-washable fabrics and two flexible, dishwasher-safe cup holders.
Everyday Protection
Fit360® Zip includes a steel-reinforced shell and sculpted EPP energy-managing foam. A removable head and body positioner supports infants 4-11 lbs.
To get started, scan the QR code on the car seat or visit www.ChiccoFit360.com for your complete digital resource. Learn how to install, use and clean your Fit360®.
Featuring Advanced Side Impact Protection (ASIP), Fit360® Zip is engineered to meet the Federal Motor Vehicle Safety Standard FMVSS 213a – Side Impact.
The Fit360® Zip ClearTex® Rotating Convertible Car Seat is the all-around easiest-to-use car seat for everyday travel. The 360° one-hand rotation provides an optimal experience to comfortably secure your child in the seat and just as comfortably remove them when your ride is complete. The Fit360® Zip starts face-to-face for easy loading and unloading, and then turns to rear-facing (4-40 lbs.) or forward-facing (26.5-65 lbs.) when you are ready to ride.
For added convenience, Fit360® Zip features a Zip & Wash seat pad that is easy to remove for machine washing. The full-length zipper allows you to remove the entire seat pad in one piece.
Includes Fit360® Mirror
The Fit360® Mirror easily attaches to the Fit360® base, offering you a clear view to check on your baby while they are rear-facing in the back seat. The convex mirror attaches at the correct angle – no adjustments needed. The mirror is shatter-resistant and crash test approved for the Fit360® Rotating Convertible Car Seat.
Install with Confidence
Installing the Fit360® is as simple as open-route-close with Chicco-exclusive LeverLock® seat belt installation. Open the LeverLock® door on the Fit360® base and route the seat belt using the easy-access belt guides on the base. By simply closing and latching the LeverLock® door, the vehicle belt is tightened in a way that eliminates any movement from front-to-back or side-to-side. This provides secure installation with minimal effort, ensuring reliable stability over time.
Once the base is securely installed in the vehicle and the seat is attached to the base, the red or green ready-to-ride indicators found on both sides of the base clearly indicate if the seat is properly positioned (green) or not (red) for travel in a moving vehicle.
You can purchase an additional Fit360® base that can be installed in another vehicle allowing you to easily move the Fit360® seat from base-to-base.
Everyday Comfort
The ergonomic seat shell and ultra-plush seat pad support your child in a natural seated position and provide enhanced comfort as they grow. The Fit360® base is equipped with six recline positions that allow you to select the ideal seating angle during installation. Featuring ClearTex® flame retardant-free materials, Fit360® Zip ClearTex® is GREENGUARD Gold Certified for low chemical emissions, contributing to healthier air quality around your child.
Everyday Ease
The Quick-Secure Harness System features a 15-position, easy-adjust headrest that simultaneously adjusts the harness height. The flex-forward crotch buckle stays out of the way for easy child loading and magnetic harness holders keep straps and buckles contained until ready for use. The quick-secure magnetic chest clip offers easy in and out without the fuss.
Everyday conveniences include zip-off machine-washable fabrics and two flexible, dishwasher-safe cup holders.
Everyday Protection
Fit360® Zip includes a steel-reinforced shell and sculpted EPP energy-managing foam. A removable head and body positioner supports infants 4-11 lbs.
To get started, scan the QR code on the car seat or visit www.ChiccoFit360.com for your complete digital resource. Learn how to install, use and clean your Fit360®.
Featuring Advanced Side Impact Protection (ASIP), Fit360® Zip is engineered to meet the Federal Motor Vehicle Safety Standard FMVSS 213a – Side Impact.
Dimensions (Overall): 25.75 Inches (H) x 18.25 Inches (W) x 20 Inches (D)
Weight: 31.25 Pounds
Suggested Age: 0-6 Months
Features: 360 Rotating, Fits 3 Car Seats Across, Forward or Rear Facing Seat, Rotating, Machine Washable Seat Pad
Fits Child (Forward Facing): Height between 0 Inches and 49 Inches, Weight between 26.5 Pounds and 65 Pounds
Fits Child (Rear Facing): Height between 0 Inches and 43 Inches, Weight between 4 Pounds and 40 Pounds
Includes: Cup Holder, Baby Seat Insert
Industry or Government Certifications: FAA Approved, Meets Federal Motor Vehicle Safety Standards, JPMA Certified
Material: Metal, Plastic, Polyester
Battery: No Battery Used
Care & Cleaning: Machine Wash
Warranty: 1 Year Limited Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, please call Target Guest Services at 1-800-591-3869
TCIN: 94685773
UPC: 049796613797
Item Number (DPCI): 030-09-0756
Origin: Imported
If the item details aren’t accurate or complete, we want to know about it.
Shipping details
Estimated ship dimensions: 23 inches length x 20 inches width x 27 inches height
Estimated ship weight: 43 pounds
We regret that this item cannot be shipped to PO Boxes.
This item cannot be shipped to the following locations: American Samoa (see also separate entry under AS), Guam (see also separate entry under GU), Northern Mariana Islands, Puerto Rico (see also separate entry under PR), United States Minor Outlying Islands, Virgin Islands, U.S., APO/FPO, Alaska, Hawaii
This item ships in its manufacturer’s packaging, revealing what’s inside. ·
Return details
This item can be returned to any Target store or Target.com.
This item must be returned within 90 days of the date it was purchased in store, shipped, delivered by a Shipt shopper, or made ready for pickup.
See the return policy for complete information.