Graco Turn2Me 3-in-1 Rotating Convertible Car Seat

A: no it stays in the car

A: When are we suppose to remove the new born cushions? Thanks!!

A: Is it aircraft approved?

A: It is not detachable like most car seats. We had to bring the whole thing in when getting sent home from the hospital, it is not easy to move around with but is helpful for spinning in the car to get baby in the car seat.

A: Thank you for your interest in our products! The Turn2Me 3-in-1 Rotating Car Seat is designed to remain installed in your vehicle. Unlike infant car seats, it does not detach from the base. We hope this helps! - The Graco Team

A: Thanks for your interest in our products! All Graco car seats (excluding backless boosters) manufactured before June 30, 2025 have undergone rigorous side impact testing to our internal standards and are safe ans meet all the regualtions and standards active on maufacturing date. - Graco Team

A: Usually it’s by 11 pounds in most Graco seats

A: Thanks for reaching out! The infant inserts for the Turn2Me 3-in -1 Rotating car seat must be used together. Use only in rear facing position. . Body support must be used if shoulders are below the lowest harness setting. If shoulders are abouve the lowest hasrness setting they can be removed. We hope this helps! Graco Team

A: there is not a stroller compatible with this. it stays in the car.

A: Thank you for your interest in our products! The Turn2Me 3-in-1 Rotating Convertible Car Seat is not compatible with strollers. We hope this helps! - The Graco Team

A: You can turn the car seat whenever you need to get your toddler in/out of it, it is very easy compared to other car seats. The only time it must remain locked in rear or forward facing is when the car is moving with the child in the seat. You can leave the seat turned any way if child is not in it to allow extra room.

A: Thanks for reaching out! The Turn2Me turning function is only able to be used when the car seat is rear facing, to make it easier to get baby in and out of the vehicle. Thanks! - The Graco Team

A: Thanks for your interest in our products! The Graco Turn2Me 3-in-1 Rotating Convertible Car Seat does convert to a highback booster. Graco Team

A: Thank you for your inquiry on the Turn2Me 3in1 Rotating Car Seat! The car seat can be in any of the 4 recline positions in rear facing mode. Make sure to adjust the recline until the bubble is completely within the blue zone. We hope this helps! - The Graco Team

A: Thanks for your interest in our Turn2Me 3-in-1 Rotating Convertible Car Seat! The turn function for this model is only able to be used in the rear-facing mode. When transitioning this model from rear-facing to forward-facing the base of the seat does stay in place but where the lower anchor Latch strap are threaded through will be adjusted and the level indicator may need to be releveled. The user's manual should assist with how to install forward-facing but you can also reach out to our Consumer Care Team for further assistance at 800-345-4109, M-F 9am-5pm EST. Hopefully this helps! -The Graco Team

A: Thanks for your interest in our Turn2Me 3-in-1 Rotating Convertible Car Seat! This model has a base built into the seat, so you will not need an additional base to use with this model. Unlike an Infant Car Seat this model is not removable from it's base. Hopefully this helps! - The Graco Team

A: Thank you for reaching out! The Turn2Me Rotating Car Seat has 2 SnugLock areas depending upon if you are using the seat forward-facing or rear-facing. The forward-facing SnugLock is under the back seat pad where your child would rest their back. The rear-facing SnugLock would be under the compartment and seat pad where the child's bottom would be. There is a door you need to lift up in order to access the rear-facing SnugLock. If you are still having issues please feel to reach out to our Consumer Care Team at 800-345-4109, M-F 9am-5pm EST. We look forward to hearing from you! - The Graco Team