JLab Pop Party Portable Speaker - Black: Bluetooth, Dual Pairing, LED Light, Waterproof

A: tv you 43khbj. Hit vg

A: Update to this question: Currently, the Pop Party Speaker is not magnetic nor does it contain magnets for mounting.

A: Hi msmay, thanks for reaching out about JLab Pop Party Portable Speaker. The JLab Pop Party Portable Speaker offers multiple mounting options for flexible use. It includes a detachable loop handle that can be used to secure the speaker to a belt loop, backpack strap, or bicycle handlebars. Additionally, the speaker has built-in magnets, allowing it to be attached to compatible surfaces. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.

A: Hi Kate, we have a single button on the Pop Party speaker and it's a multi-use button! The following configurations come standard for button presses: POWER ON: PRESS HOLD 2s POWER OFF: PRESS HOLD 3s PAIR NEW DEVICE: When powered off PRESS HOLD 8s PLAY/PAUSE: 1x TRACK FORWARD: PRESS HOLD 2s LED CHANGE: 2x (cycles 6 LED Animations) EQ CHANGE: 3x LabSync: 5x (see LabSync page to connect JLab Party Speakers)

A: Hi, thank you for reaching out about JLab Pop Party Portable Speaker. The JLab Pop Party Portable Speaker features a minimalist design with a single physical multi-function button (along with a power function integrated into it or the device layout) that manages all onboard physical controls. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.

A: Hi Jeannine, the Pop Party speaker has a USB-C port which can use any usb-c cable to charge via a wall charger. I hope this helps!

A: Hi, thanks for reaching out about JLab Pop Party Portable Speaker To charge the JLab Pop Party Portable Speaker: Locate the USB-C charging port on the speaker. Open the protective rubber gasket/cover next to the multifunction button. Connect the included USB-C cable to the speaker. Plug the other end into a: USB wall charger, or Computer USB port If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.

A: Hi Lynn L, the Pop Party speaker doesn't come with a cord! It should be fully charged out of the box, but no cord is packed in! I hope this helps.

A: Hi, thanks for reaching out about JLab Pop Party Portable Speaker To address your question, and make sure you get the most accurate and correct answer, we invite you to reach out to our Target Guest Services team at 1-800-440-0680.

A: When charging, you will see a blue light just above the charging port. That light will pulse blue while charging and there will be no light once it is fully charged. Thank you, JLab Customer Support

A: Hi, thanks for reaching out about the JLab Pop Party Portable Speaker For the JLab Pop Party Portable Speaker, you can tell it’s fully charged by the LED indicator light. Solid red light = Charging The light will either turn off completely or change color when it’s done charging. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day between 7 am and 11 pm CST.

A: Hi Christina, unfortunately no 3.5mm jack on these! I do apologize for the trouble.

A: Hi Christina, thanks for reaching out about the JLab Pop Party Portable Speaker JLab Pop Party Portable Speaker does NOT have a 3.5mm audio jack. It is designed for strictly wireless (Bluetooth) connectivity. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day between 7 am and 11 pm CST.

A: Hi Amanda, thanks for reaching out about JLab Pop Party Portable Speaker. The JLab Pop Party Portable Speaker has an IPX5 water-resistant rating. What this means: -IPX5 water resistance means the speaker is protected against low-pressure water jets from any direction. -It can handle splashes and light rain, making it suitable for outdoor use where it might get wet. However, this does NOT mean it can be fully submerged in water. Therefore: -You can use the JLab Pop Party speaker in the shower, but you should be careful to avoid prolonged exposure to direct streams of water. -You should not use the JLab Pop Party speaker in a pool as it's not designed to be submerged. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.

A: Hi Amanda, definitely use the Pop around the pool or the shower! We have an IPX5 rating on these, so as long as they aren't fully submerged under water, you'll be totally fine! Enjoy!

A: Hi JPal808, very fair. Currently, the Pop Party speaker doesn't contain a magnet. I apologize for any confusion this caused.

A: Hi KLW, the Pop Party is not magnetic! Great question. It has a detachable handle that allow for it to be connected to many different things, but it doesn't have an integrated magnet!

A: The Pop Party have 5w speakers. Thank you, JLab Customer Support