JLab Go Party Portable Speaker - Black: Bluetooth, Waterproof, USB-C Charging, LED Light

A: Hi, thanks for reaching out about JLab Go Party Portable Speaker Most likely yes, Most vehicle cup holders are around 3 to 3.5 inches in diameter, so the Go Party's 3.07-inch width should fit in many standard car cup holders. However, fit can vary depending on your vehicle's cup holder size and shape. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.

A: Hi Jess1019, yes honestly this should fit in a cupholder! It might be a perfect cupholder size I hope this helps!

A: Hi lee, great question! Yes they absolutely can connect to an Alexa-enabled device, like a Echo or Echo Dot with bluetooth, but that doesn't enable Alexa on the Go Party Speaker. You'd still have to speak to the Echo to trigger Alexa, it just might use the Go party Speaker to cast the audio! I hope this helps.

A: Hi, thank you for reaching out about JLab Go Party Portable Speaker. Yes, the JLab Go Party Portable Speaker can connect to an Alexa device (like an Echo or Echo Dot) using standard Bluetooth. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.

A: Hi GSM, great question, yes the Speaker has a smart charging limiting feature, that will only take the mass voltage possible to charge the speaker! Plug in and enjoy :)

A: Hi, thanks for reaching out about the JLab Go Party Portable Speaker No, JLab states the charger should provide between 2.5W and 5W, which normally means a standard 5V USB charging source. Standard USB charger, phone charger, computer USB port, or USB-C PD charger. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day between 7 am and 11 pm CST.

A: Hi, thanks for reaching out about the JLab Go Party Portable Speaker When the JLab Go Party Portable Speaker is plugged in and charging:The speaker's indicator lights pulse (fade in and out) while charging. When the battery is fully charged, the lights turn off. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day between 7 am and 11 pm CST.

A: Hi Decor, great question! The Go Party speaker has a light that pulses on the speaker when it's charging, but when it's complete, the light turns off! I hope this helps.

A: Hi Idk, the Go Party speaker isn't necessarily considered waterproof, but it is water resistant, so it can't survive fully immersed in water, but it can absolutely be splashed or sit by the pool without risk of being shorted out or damaged by being near water! I hope this helps. Don't take it under water, basically!

A: Hi, thanks for reaching out about the JLab Go Party Portable Speaker. It is water resistant, not fully waterproof, so it’s not rated for extended time underwater. It can handle splashes, light rain, or brief exposure to water It is not meant to be submerged or used underwater for any period of time So there is no set “time limit” underwater because it is not designed for that use at all. If you have any additional questions, we welcome you to contact MyTGTtech at 833‑848‑8324 every day, between 7am–11pm CST.

A: Hi willa, great question. Actually, to counter Target's response below, the Go Party Speaker doesn't come with a charging cord. We found that almost everyone was throwing them away and JLab is a major proponent of cutting down waste and our impact on the globe. I hope this helps!

A: Hi, thank you for reaching out about JLab Go Party Portable Speaker. Yes, the JLab Go Party Portable Speaker comes with a USB-C charging cable included in the box. You will just need to provide your own standard USB-A wall adapter (like a typical phone charger) to plug it into an outlet. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.

A: You can fully customize the LED colors on all JLab Speakers through the JLab App. If you need any help getting that set up, please reach out to our support team. support@jlab.com Thank you, JLab Customer Support

A: This is not the correct answer. I just did mine 2 mins ago, you do it on the speaker itself, with the on/off button, press once and it cycles thru 6 different led settings (including lights off). It does not do any solid colors, only variations on blinking & flashing of various rainbow colors.

A: Hi sb, yes it absolutely can. There is voltage limiting tech in it, to only charge at the rate it needs. I hope this helps!

A: Thank You. Needed to read this answer I was questioning the charger voltage On a regular USB charger Thank you again. Much appreciated

A: Yes. In the JLab app, there is an option to turn the lights off.

A: Thr lights do turn off but its on the speaker itself, not in the app.

A: Hi Question, these charge fully in around 2 hours and then have up to 16 hours of playtime off of that charge! I hope that helps

A: Hi Question, thanks for reaching out about JLab Go Party Portable Speaker. This has upto 16 hours of playtime. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.