SodaStream Fizz & Go Easy Mix Bottle Sand

The bottle is very sturdy and comes apart between the colored cap and colored adapter. This adapter does not fit into the soda stream. You Have to unscrew the adapter from the bottle before you put into soda stream.

I had seen the new bottles on the website and was interested. The old bottles being plastic, and weird shaped, they always fall over. I clicked the compatibility button, entered the model I have, one touch, and looked to see what was compatible. It said the new bottle was compatible, so I pulled the trigger. For my machine, I have to put more water in the bottle than what the line indicates for the tube in the machine to actually touch the water. This makes it difficult then to add syrup without wasting because then the carbonated water is above the syrup line. The bottle works like a bottle. The lines on the bottle for the water level and syrup level are easy to read when the bottle is empty but impossible to read when its filled with carbonated water. I sharpied over them so I could see them.

The bottle does not hold the carbonation, it leaks liquid at the seem between the plastic top and the stainless bottom. Would not buy again. I was told it was a glass and stainless, it is plastic and stainless

small not the regular size like the other bottles it does fit if you take the top off though

Very cute. I was worried due to the questionable reviews, and at first when I was trying to use it, it seemed like it did not fit in my SodaStream Terra, but the instructions lacked some clarity. The bottle actually has four parts. My drinking lid was on super tight, and so it felt like that piece wasn't supposed to come off. But it DOES need to come off to fit into the SodaStream. The instructions didn't say anything about needing to take it off, and because it was on so tight, I thought I was breaking the bottle to get it off. But all is good now! I've used it a few times and I like having my own personal water bottle for the SodaStream. I like the bottom metal part of the bottle and feel like I might use it as an open cup sometimes when going places with the bottle.

doesn't work with older models

So the bottle fits when you remove the middle cap. Why even have that cap!? What’s the point? Because all it does is allow the soda to go flat! It doesn’t seal well at all. I’m so confused by this bottle.

Does NOT fit. I have one of the original Soda Streams and it does not fit.

The design on these is very poor. It has three separate screw points. The screw point in the middle is absolutely useless and I do not understand why they have it. Unfortunately, water sprays out of this area if there is even a slight leak and it is very difficult to get them lined up. We had it on as tight as it could go and it’s still sprayed everywhere. I do not recommend these at all.

Doesn’t fit the sodastream

Make sure you read everything about these bottles; I did NOT know it wouldn’t fit every machine. I don’t even know what kind of soda stream I have! AND the amount of packaging that came with it was ridiculous.

a very well considered and well designed bottle. only drawback is that it's a little on the heavy side for the size.