About this item
Highlights
- Premium Aluminum—Snap Grip's trim matches the high-end look and feel of your phone
- MagSafe + Charge Thru—You’ll never have to remove Snap Grip to wirelessly charge or use any other Magsafe accessory. Magsafe pop grip
- Stupid Thin—At 2.5mm, Snap Grip is as thin as a nickel and sits lower than the camera bumps on almost every phone
- Magnetic (Stick it.)—You can stick Snap Grip to most metal surfaces which means gym racks, car mounts, fridges, etc.
- Hand positions—Snap Grip has multiple comfy gripping positions that allow for a one finger, two finger or full hand grip
- Easy Entry—Press or slide to open with one finger, or pull open with two
- Kickstand—Slide the cap open and lock into a sturdy phone stand
- Fidgety—Spin your phone on your finger in grip mode or press the magnetic center cap open and closed for a satisfying fidget session
Description
Snap Grip Luxe matches the high-end look and feel of your phone with a premium aerospace-grade aluminum trim. This pop grip is thinner than your camera bumps so you won’t snag it on your pockets and magnetic so you can mount it to anything steel. Snap Grip is the only magsafe phone grip that you don’t have to remove for wireless charging. Press or slide it open with one hand for a super comfortable grip or lock the cap in place for a solid multi-angle kickstand.
Reusable adhesive: Simply run the adhesive under lukewarm water, then scrub any dirt off with your finger. Once clean, shake off excess water and let air dry. Then you can re-install! Snap Grip's adhesive is practically infinitely reusable.
Use it anywhere, from the gym to the kitchen to the couch for hands-free convenience that fits your day:
o Gym-Ready: Magnetically attaches to workout equipment so you can film your form or stream content hands-free.
o Kid-Friendly: Prop it up at the table so little ones can watch their favorite shows while dining out.
o Kitchen Companion: Keep recipes or cooking videos in view while you whip up your next meal.
o On the Go: Use as a car mount for easy, eye-level navigation during drives.
o Comfy Scrolling: Lounge and scroll in bed without worrying about dropping your phone on your face.
Shipping details
Return details
Q: Is the center magnetic or metal? I’m wanting to mount an iPad Mini to a magnetic mount that’s less than 1 inch in diameter in my car. Thx!
A: No, the center is not magnetically strong enough to mount to. The outer ring has very strong magnets to mount to Magsafe/Qi2/steel, but the center is mostly plastic w/ small magnets to close the cap.
submitted byPete D - 9 months agoA: Hi EmmetsMom, thanks for reaching out about ohsnap! Snap 4 Luxe Magnetic Phone Grip - Ultra Thin, Fits Any Phone. The center of the ohsnap! Snap 4 Luxe Magnetic Phone Grip is magnetic. This magnetic center allows it to attach to magnetic mounts, making it potentially suitable for your iPad Mini 7 mounting needs. However, keep these points in mind: iPad Mini 7 Compatibility: While the grip itself is designed for phones, it might work with the iPad Mini 7 depending on the strength of the magnets and the weight of the tablet. Mount Size: Ensure your magnetic mount is indeed less than 1 inch in diameter and has sufficient magnetic strength to securely hold the iPad Mini 7. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.
submitted byJoe - 9 months agoTarget staff supportA: Hey EmmetsMom - awesome question! The center is plastic to allow for charging pass through
submitted byOh Snap! team - 8 months agoBrand expert
Q: What is the diameter of the center pop out section
A: Hi Barbara, thanks for reaching out about the ohsnap! Snap Grip Luxe Magnetic Phone Grip - Ultra Thin, Fits Any Phone The center pop-out section on the ohsnap! Snap Grip Luxe Magnetic Phone Grip is not a specific diameter. The grip itself measures 58mm (2.28 inches) in height and width. The center pop-out is a scissor-like mechanism that extends from the grip to provide a more secure hold or to act as a stand. It's designed to be thin, at 2.5mm (0.1 inches) thick, so it won't interfere with wireless charging or MagSafe accessories If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day between 7 am and 11 pm CST.
submitted byRena - 4 months agoTarget expert supportA: Hey Barbara! Awesome question! The inside cap is 38.5mm. If you have any other questions - please don't hesitate to reach out to support@ohsnap.com
submitted byOh Snap! team - 3 months agoBrand expert
Q: Hi, will this attach to an iPhone silicone case?
A: Hi LarryS, thanks for reaching out about the ohsnap! Snap Grip Luxe Magnetic Phone Grip - Ultra Thin For standard (non-MagSafe) silicone cases: No, the adhesive is not designed to stick reliably. Some users have reported having to glue it on, which is not ideal. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day between 7 am and 11 pm CST.
submitted byRena - 4 months agoTarget expert supportA: Hey LarryS! Thanks for reaching out! Yes! The Snap Grip works with silicone cases that also have built in magsafe. If you have any other questions, please don't hesitate to reach out - support@ohsnap.com
submitted byOh Snap! team - 3 months agoBrand expert
Q: Does it have an adhesive so it sticks to any phone or is it like a magnetic pop socket and has no adhesive?
A: Hi Pmed, thanks for reaching out about ohsnap! Snap 4 Luxe Magnetic Phone Grip - Ultra Thin, Fits Any Phone. The Ohsnap! Snap 4 Luxe Magnetic Phone Grip utilizes a combination of magnetic attachment and adhesive, depending on the situation: MagSafe Compatibility: It is designed to be MagSafe compatible, meaning it can magnetically attach to iPhones with MagSafe capabilities or MagSafe compatible cases. Adhesive Assistance: It also utilizes a "nano-adhesive assisted" system. This means that while it is magnetic, it can also use adhesive to provide a more secure hold. This is especially useful for: Phones or cases that are not MagSafe compatible. When using the grip with magnetic mounts or other metal surfaces, where the phone's internal magnets might not be strong enough on their own. Also ohsnap sells replacement adhesive kits. So the adhesive is a component of the product. Therefore, it's not strictly one or the other. It leverages magnetic attachment where possible and uses adhesive to enhance its grip and expand its compatibility. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.
submitted byJoe - 7 months agoTarget staff supportA: Hey Pmed! Awesome question! This does have an adhesive so we can attached to any phone and/or case! It's super easy to remove and reuse as well. Any other questions, please don't hesitate to reach out: support@ohsnap.com We hope you give us a try!
submitted byOh Snap! team - 7 months agoBrand expert
Q: Is the center magnetic or metal? I’m wanting to mount an iPad Mini 7 to a magnetic mount that’s less than 1 inch in diameter in my car. Thanks!
A: Hey EmmetsMom - awesome question! The center is plastic to allow for charging pass through
submitted byOh Snap! team - 8 months agoBrand expertA: Hi EmmetsMom, thanks for reaching out about ohsnap! Snap 4 Luxe Magnetic Phone Grip - Ultra Thin, Fits Any Phone. The center of the ohsnap! Snap 4 Luxe Magnetic Phone Grip is magnetic. This magnetic center allows it to attach to magnetic mounts, making it potentially suitable for your iPad Mini 7 mounting needs. However, keep these points in mind: iPad Mini 7 Compatibility: While the grip itself is designed for phones, it might work with the iPad Mini 7 depending on the strength of the magnets and the weight of the tablet. Mount Size: Ensure your magnetic mount is indeed less than 1 inch in diameter and has sufficient magnetic strength to securely hold the iPad Mini 7. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.
submitted byJoe - 9 months agoTarget staff support
Q: will it work if you have a case on the phone?
A: Hi PatC, thanks for reaching out about ohsnap! Snap 4 Luxe Magnetic Phone Grip - Ultra Thin, Fits Any Phone Yes. This will attach to a phone case If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.
submitted byJustin - 10 months agoTarget expert supportA: Hey PatC - Great question! Yes, the grip will work with many phone cases, especially if they are MagSafe-compatible or have a smooth surface for the adhesive to stick securely. If you’re using a thicker or textured case, we recommend ensuring it’s compatible with magnetic accessories for the best experience. If you have any other questions, feel free to reach out to us at support@ohsnap.com—we’re happy to help!
submitted byOh Snap! team - 9 months agoBrand expert
Related Categories
Great product!
Hinge Issues
Amazing product per usual
The best iPhone accessory!
It pretty good.
Broke the first week.
Not for me
Not strong enough
Love it!
It was a replacement Snap.
High value item
Really cool grip
Oh Snap
2nd review
Great! but not perfect.
Chinsy build. Not easy to use
Everyday use!
Awesome
Great product!
A Niche Device Stand