Sponsored
Tripp Lite 120-Volt 2,400-Watt Line Conditioner, 6 Outlets, 6-Ft. Cord, LC2400 in Black
$359.99 sale price when purchased online
$492.34 list price
Target Online store #3991
About this item
Highlights
- Ideal for protecting computers, routers, modems, home theater components, and point-of-sale equipment
- Corrects under- and overvoltages in 89-volt to 147-volt range
- Protects against spikes with 1,440 Joules of surge suppression
- Monitors power status with front-panel diagnostic LEDs
- Rear on/off switch provides 1-touch power control over all components
- 4 NEMA 5-15R and 2 NEMA 5-20R rear outlets
- Rated at 120 volts/2,400 watts/20 amps
- EMI/RFI noise filtering protects AC line from disruptive electromagnetic and radio interference
- 6-ft. cord with flat, right-angle plug
- Dimensions: 7 in. H x 6 in. W x 9.5 in. D
- 2-year limited warranty; $25,000 Ultimate Lifetime Insurance (US, Canada, and Puerto Rico)
- Includes owner's manual
Description
The Tripp Lite® by Eaton® LC2400 2,400-Watt 120-Volt Line Conditioner adjusts under- and overvoltages to provide safe, computer-grade AC power. The automatic voltage regulation (AVR) offers 3 levels of voltage stabilization that corrects undervoltages as low as 89 volts and overvoltages as high as 147 volts back to regulated 120-volt nominal power. Providing optimum voltage conditions not only extends the life of your equipment, but also keeps your equipment working through brownouts and prolonged overvoltage conditions. The network-grade surge suppression prevents even the strongest spikes from inflicting damage, data loss or corruption and audio/video performance problems on your connected equipment. Noise filtering removes potentially disruptive line noise. Plug up to 6 devices into the 4 NEMA 5-15R outlets and 2 NEMA5-20R outlets. You can monitor AC power, incoming voltage level and AC line status using the 7 diagnostic LEDs on the front panel. The compact LC2400 will fit comfortably into your computer or home theater setup!
Dimensions (Overall): 9.5 inches (L), 6 inches (W), .16 inches thick
Weight: 11.2 pounds
Cable/Cord Length: 6 feet
Joule Rating: 1440
Number of outlets: 6
Warranty: 2 Year Limited Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, please call Target Guest Services at 1-800-591-3869
TCIN: 90148348
UPC: 037332040060
Origin: imported
The above item details were provided by the Target Plus™ Partner. Target does not represent or warrant that this information is accurate or complete. On occasion, manufacturers may modify their items and update their labels.
We recommend that you do not rely solely on the information presented. If you have a specific question about this item, you may consult the item's label, contact the manufacturer directly or call Target Guest Services at 1-800-591-3869.
If the item details above aren’t accurate or complete, we want to know about it.
Shipping details
Estimated ship dimensions: 10.2 inches length x 8.8 inches width x 7.8 inches height
Estimated ship weight: 11.8 pounds
This item cannot be shipped to the following locations: American Samoa (see also separate entry under AS), Guam (see also separate entry under GU), Northern Mariana Islands, Puerto Rico (see also separate entry under PR), United States Minor Outlying Islands, Virgin Islands, U.S., APO/FPO, Alaska, Hawaii
item ships from third party seller: Diddly Deals
Return details
This item can be returned to any Target store or Target.com.
This item must be returned within 30 days of the date it was purchased in store, shipped, delivered by a Shipt shopper, or made ready for pickup.
See the return policy for complete information.
Frequently bought together
Discover more options
Related Categories
- Extension Cords
- Power Equipment Parts & Access...
- Electrical
- Surge Protectors
- Cables, Cords & Adapters
- Computer & Office Accessories
4.6 out of 5 stars with 38 reviews
Kyocera power fix
5 out of 5 stars
Kevin - 11 days ago
originally posted on http://www.tripplite.com
Needed a LC2400 to resolve an issue on my Kyocera printer. Should keep the power regulated so when the mfp does multiple tasks it doesn't have a fluctuation.
Not working after 4 months
2 out of 5 stars
Aotian - 5 months ago
originally posted on http://www.tripplite.com
It is not working after 4 months from newly purchased and the switch button is also not functioning.
1 reply from Tripp Lite team - 5 months ago
Dear Aotian - Thank you for your comments. We're very sorry the LC2400 power conditioner is not meeting your expectations. It is covered by a 2-year warranty. We would like to help you, so please contact our Customer Support Team at TechSupport2@Eaton.com or open a support ticket here: https://tripplite.eaton.com/support/technical-support-request
I would repeatedly buy this product again
5 out of 5 stars
Yassine - 9 months ago
originally posted on http://www.tripplite.com
This is a leader in electronics protection it is rare that a product linked to their equipment gets damaged it's truly a life saver. I get good night sleeps knowing my equipment are well protected
Exactly What I Was Looking For
5 out of 5 stars
RNSpiller - 1 year ago
originally posted on http://www.tripplite.com
I use this to ensure that the controller for my CNC machine receives clean power preventing errors during production.
This is my 4th Tripp Lite Line Conditioner
5 out of 5 stars
NWA Steve - 1 year ago
originally posted on http://www.tripplite.com
This is my 4th Tripp Lite Line Conditioner, I plug all of my commercial laser engraving machines into Tripp Lite Line Conditions to protect the sensitive motherboards and other sensitive electronics. I purchased my first unit 10 years ago and it is still going strong. I have a great deal of confidence in Tripp Lite units. Highly recommend.
1 reply from Tripp Lite team - 1 year ago
Thank you for your feedback, Steve. We're glad the LC2400 meets your expectations and is doing a great job protecting your laser engraving machines. We appreciate hearing how customers use our solutions, particularly long-term customers such as yourself.
Using in a shared commercial building on machines.
5 out of 5 stars
Eric - 2 years ago
originally posted on http://www.tripplite.com
Using this to condition power for two commercial embroidery machines. The building is shared by others and we wanted to make sure that we have no power fluctuations. Easy to use, plug and play.
Use it the time for my clients
5 out of 5 stars
Chef Bert - 2 years ago
originally posted on http://www.tripplite.com
Does what it's supposed to. My go to for a power conditioner for all my clients!
Surge protection plus steady voltage
5 out of 5 stars
Benny - 3 years ago
originally posted on http://www.tripplite.com
Running anything today in an overworked system is not good for electronics but this definitely levels the playing field. Great product highly recommend
Yes I would buy again, but only if I needed it.
4 out of 5 stars
Scott - 3 years ago
originally posted on http://www.tripplite.com
It does its job. Which is good. It would be great if the price was not so high. For the price it should be made in the United States. Also, the display should be oriented 90 degrees to the outlet not 180 degrees. That way you could still see the front, have case against the wall and still have cords enter from one side or both.
I would buy this product over and over, and I have!
5 out of 5 stars
Carlos - 3 years ago
originally posted on http://www.tripplite.com
I use it to protect an advanced content creation PC along with 3 QHD Monitors. Very reliable unit, I had used previously the 1800 and 2400 watts version concurrently and thanks to these my equipment was protected from the weather incidents and power company brownouts. I decided to go with same brand as I have experienced for years the reliability of this product.
Very good product
5 out of 5 stars
K. - 3 years ago
originally posted on http://www.tripplite.com
I use this in my music studio. Perfect way to help protect equipment!
Worth every penny
5 out of 5 stars
GREG - 3 years ago
originally posted on http://www.tripplite.com
I have two LC units I the piece of mind is priceless
FIVE STARS TRIPP LITE IS POWER!!
5 out of 5 stars
José - 3 years ago
originally posted on http://www.tripplite.com
Very good five stars.. Buy it!!
Great product for Peace of mind.
5 out of 5 stars
JULIE - 3 years ago
originally posted on http://www.tripplite.com
This is used to protect my very expensive sauna from electrical inconsistencies that happen often in my town.
Inexpensive Power Conditioner
5 out of 5 stars
JustBill - 4 years ago
originally posted on http://www.tripplite.com
I've used TrippLite hospital grade surge protectors for my computers and stereo gear for years, and they do a solid job. It seemed this would be a reasonable choice particularly for the stereo. I've tried a couple of much more expensive power conditioners for my main stereo system. One made no noticeable difference. The other seemed to fog or veil the sound, especially high frequencies. This does it's job. It's not a night and day improvement. The system already sounded very good with the hospital grade surge protectors, but there is a reduction in background noise. I played one of my favorite playlists before and after connecting it, listening carefully, and it seems cleaner, just the music. Very nice, and not thousands of dollars!
Don't let bad power ruin a perfect event
5 out of 5 stars
Andreas - 4 years ago
originally posted on http://www.tripplite.com
After a DJ gig where I had bad hum in my powered speakers, and unexplained interference on the wireless mics, I decided to get this line conditioner to use on all my gigs. I'm assuming there was just bad power at the site, so in the future I don't want this happening again. I needed a high quality power line conditioner that could handle anything and give my equipment good clean power. It's small enough to take with and fits under my table, and powerful enough to handle all my equipment.
Auwsome
5 out of 5 stars
Greg - 4 years ago
originally posted on http://www.tripplite.com
I live in the country and with the recent outages from Ida I invested in a new generator. While I was researching which gen I wanted I came across the THD rating. In short the distortion from the gen. that destroys sensitive electronics. So this lead me to getting a low THD gen. and the Power Conditioner to ensure all my goodies are protected. I did not realize how much the Entergy's supply is fluctuating. I have it plugged in my living room with Entergy supply and it clicks all the time. The clicking is it controlling the power. I really would like to get one for every room. I just can't swing that right now. Though it will happen in the future a Power Conditioner at a time.
Functions as expected
5 out of 5 stars
Brandon - 4 years ago
originally posted on http://www.tripplite.com
I would prefer if the product came with 20 amp plug already installed.
Not a steady 120V output
2 out of 5 stars
snap - 4 years ago
originally posted on http://www.tripplite.com
make sure you understand 120V nominal voltage means approx 112V- 127V so if you are looking for a steady 120V output - this will not do it
1 reply from Tripp Lite team - 4 years ago
Thank you providing the feedback regarding nominal voltage. More information regarding the voltage regulation specifications of this product can be found on the Tripp Lite website. If you believe your product is not working according to specifications, please contact Tripp Lite's technical support team at 773-869-1234 or via our contact page on our website. We appreciate the comments and the feedback.
Don't buy this for a fridge or other motorized appliance!
2 out of 5 stars
A - 4 years ago
originally posted on http://www.tripplite.com
Bought this for my refrigerator because where I am there are frequent brownout, down to 90-100 VAC. Low voltage causes motor windings to overheat reducing the life of the compressor motor. I did the calculations for inrush current (3x running current) and this one easily complies. Checked it out before use with a Kill-A-Watt and works great - boosts voltage as advertised. Checked it out with a 1500W hair dryer, worked great. Plugged fridge in and nothing happened. Fridge did not start. Must have something to do with the inductive load of the motor. Contacted Tripp Lite and the silence has been deafening...