Brixwell Patio Door Tandem Roller, 1-1/2" Steel Wheels Diameter, 5-3/4" Housing Length, Stamped Steel Housing, Sliding Door Roller, Steel Finish

Brixwell Patio Door Roller Tandem is a sliding door roller assembly used at the bottom of a patio door panel where the door rides on a track. This tandem roller uses two steel wheels in a stamped steel housing and has a steel finish as specified. The housing length measures 5-3/4", the body length measures 4-5/8", and the housing height measures 1-3/16". Each wheel diameter is 1-1/2", which helps you match the wheel size to the roller currently installed in your sliding glass door. These measurements are provided for comparison so you can confirm fit in the roller pocket, verify housing clearance, and match the original roller assembly size before ordering. Tandem rollers are commonly used in patio door hardware where a two-wheel carriage supports the moving door panel and rolls along the bottom track. This patio door tandem roller can be used when an existing tandem roller assembly is worn, binding, or not rolling as expected and you need a replacement with matching housing and wheel dimensions. For installation, access the roller pocket per your door design, remove the existing roller assembly, place this tandem roller in the same location, and adjust the roller height so the door panel sits level and moves along the track without dragging.