Energizer 10" 2pk 70 Lumens Battery Operated LED Cabinet Lights Bar with Wireless RF White: Closet Light, Remote Control

A: Hi Girlkicks, thank you for your question. Yes, they have the same frequency so if you purchase 2 packages, one remote can control 4 lights. If you have any further questions, please feel free to respond or contact us through phone or email. Thank you, Jasco Products

A: Hello Girlkicks, Thank you so much for your question. Each pack has 2 light bulbs with one switch, so unfortunately if you purchase multiples it would be 2 lights per switch. You would not be able to use one of the switches to control all of the lights. Thank you again. -GE Customer Service

A: Hi Krose764, thank you for reaching out to us with your question. It will depend on the usage. The light has 2 operating modes, ON/Off/RF. When in RF mode, your batteries will drain quicker because of the open frequency that the remote and lights will have vs simply turning the fixtures off. If you have any further questions, we encourage you to respond or contact our Customer Support through phone or email. Thank you, Jasco Products Tech Support.

A: Hi, kros764. Unfortunately, there is no definitive answer on this. Due to varying quality of batteries and use of product, there is not a way we can an accurate time. Thank you. GE Customer Service

A: Hello Liz, thank you for your question. It all depends on how often it's used, and what brand of batteries you use. There are a lot of variables. If you have any other questions, please give us a call between the hours of 7 AM – 8 PM Central Standard Time, Monday thru Friday at 1-800-654-8483, press option 4

A: Hello Miranda, thank you for your question. Each light requires 6 AA batteries. If you have any further questions, please don’t hesitate to respond or give us a call between the hours of 7:00 AM – 8:00 PM Central Standard Time, Monday thru Friday at 1-800-654-8483, and press option 4. Please refer to your ticket number (583778) if you decide to give us a call. Thank you.

A: Hello Curious, thank you bringing this to our attention. We are very sorry to hear about the issue your experience with our product. The connection between the light bar and the remote are preset. First, make sure that the orientation of the batteries is installed correctly on the remote (Negative pointing down and positive pointing up). If the problem persists, we would love to work with you directly to resolve this issue as soon as possible. Please give us call between the hours of 7AM – 8PM Central Standard Time, Monday thru Friday at 1-800-654-8483, press option 4, and provide our Tech specialist with your personal ticket # 349994, so that we can resolve your issue promptly. Also, you can email us at bz@byjasco.com and include your personal ticket number (349994) in the subject line. We look forward to assisting you in resolving this issue.

A: Hello Moorefield Family, thank you for your question. It will depend on which mounting option was used to install the fixture. If the fixture was installed using the mounting screw, you can simply slid the fixture to left to unlock it from the mounting screw and pull the fixture down. If the fixture was mounted using the double sided dual lock tape, you will need to slightly pull the fixture down to remove the fixture. If you have any further questions, we encourage you to respond or contact our Customer Support through phone or email. Thank you, Jasco Products Tech Support (Manufacturer)

A: Hi jovanortz, please reach out to our Customer Support team so we may better assist you with your issue, 800.654.8483

A: Hello Nancym, Great question and Thank you for your interest in our GE LED Light Fixture/ model: 17528. The lights have two operating modes to choose from - either control them with the wireless remote control or use the manual on/off button located on each light. If you have any further questions, we encourage you to respond or contact our Customer Support through phone or email. Thank you, Jasco Tech Support (Manufacturer)

A: Hi Needmorelight, Great question and Thank you for your interest in our GE Bluetooth Under Cabinet LED Light Fixture/ model: 17528! For each light, slowly remove adhesive and Velcro to avoid tear or damage for reuse. Remove the battery compartment on the back of the light and insert 6 AA size batteries noting polarity. Replace back. Replace Velcro strips if needed. We are here to answer any additional questions you may have. If you have any further questions, we encourage you to respond or contact our Customer Support through phone or email. Thank you, Jasco Tech Support (Manufacturer)

A: Hi Wanda, Thank you for reaching out to us and for your interest in our GE Under Cabinet Fixture/ Model: 17528. This fixture requires 6 AA batteries each, 12 total. Super long life white LEDs are included and you will never need to replace any bulbs. Note: This product comes with a 3-year limited warranty. Thank you, Jasco Products Tech Support (Manufacturer)