Full Motion 40" - 90" TV Mount - dealworthy™: Steel, 120lb Capacity

A: Can this mount be used on one single stud

A: No, my studs were 16” apart and this wouldn’t work. Works well for 12” and under. I don’t see it being adjustable so I may have to return

A: Hello Rick B - Thank you for your interest! Full Motion TV mount comes with dimensions overall 420 Millimeter (Height), 679 Millimeter (Width), 64 Millimeter (Diameter) and VESA Mounting Standard is 600x400. I hope this helps. - Zara

A: Hi WT, thanks for contacting us. The dimension of this wall mount is 26.73"*16.54"*2.52"(679*420*64mm). Pulls out to 16.6" and retracts back to 2.52". We would recommend hanging a TV size no greater than 43 in if installed on the corner.

A: Hi, Thanks for reaching out about the Full Motion 40" - 90" TV Mount - dealworthy Yes, the "dealworthy Full Motion 40" - 90" TV Mount" does have a tilting feature, along with other motion capabilities. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day between 7 am and 11 pm CST. - Lima

A: Hello Mjh - Thanks for your question! The wall plate is designed to accommodate standard stud spacing. If your studs are 24" apart (center to center), please check the product specifications to ensure it supports that spacing. Some models are compatible with both 16" and 24" stud configurations. I hope this helps! - Monica.

A: Hi Mjh, thanks for reaching out about Full Motion 40" - 90" TV Mount - dealworthy™. It's tricky to say for certain without knowing the exact dimensions of the "dealworthy™" TV mount's wall plate. However, here's what we can generally deduce and what you should do: General Information about Stud Spacing and TV Mounts: Standard Stud Spacing: In the US, wall studs are most commonly spaced 16 inches on center. However, 24-inch spacing is also found, especially in older homes, basements, or some exterior walls. TV Mount Wall Plate Width: Many full-motion TV mounts are designed to span two studs for secure installation. For 16-inch on-center studs, a wall plate around 32-36 inches wide is often sufficient to hit two studs. 24-inch Center Studs: When studs are 24 inches on center, a wider wall plate is necessary to securely attach to two studs. Analyzing the "dealworthy™" Mount: Based on one user review for the "dealworthy™ Full Motion 40" - 90" TV Mount" on Target's website, a reviewer stated: "Tv mount base is not wide enough for studs that are 24 inches apart." This suggests that the wall plate for this specific mount may not be wide enough to span 24-inch on-center studs and securely attach to two of them. What You Should Do: Check the Product Specifications: The best way to know for sure is to find the official product specifications for the "dealworthy™ Full Motion 40" - 90" TV Mount. Look for the dimensions of the wall plate or any information about compatible stud spacing. This information might be on the packaging, the manufacturer's website, or the retailer's product page. Measure Your Wall Plate (If Possible): If you already have the mount, carefully measure the width of the wall plate. If it's significantly less than 48 inches, it's unlikely to span two studs that are 24 inches apart. Consider Alternatives: If the "dealworthy™" mount doesn't accommodate 24-inch studs, you have a few options: Look for a different TV mount: Some mounts are specifically designed with wider wall plates to accommodate 24-inch stud spacing. Look for this feature in the product description. Use a mounting plate: You could potentially attach a sturdy piece of wood (a mounting plate) that does span your 24-inch studs securely. Then, you would attach the TV mount to this wooden plate. However, ensure the wood is strong enough to support the TV's weight and that you use appropriate hardware. Consider mounting to a single stud (with caution): Some single-stud full-motion mounts exist, but they are generally recommended for smaller and lighter TVs. Given that this mount is for 40" - 90" TVs, this option might not be the safest, and it's crucial to verify the mount's weight capacity and suitability for single-stud installation. In conclusion, based on initial information, it seems the "dealworthy™" Full Motion 40" - 90" TV Mount might not be ideal for 24-inch on-center studs. Double-check the product specifications or consider alternative mounting solutions for your apartment. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.

A: Hi Mata, thanks for reaching out about Full Motion 40" - 90" TV Mount - dealworthy™ (90925763) Yes. This mount will fit a 65" TV If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.

A: Hi, Mata - Thanks for asking! This TV mount can support TVs ranging from 40 to 90 inches and holds up to 120 pounds. We also recommend to check VESA Mounting Standard the TV supports, which is about the pattern of the holes used to mount. This TV mount supports the VESA Mounting Standard 600x400. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST. Have a great day! - Rob

A: 75 inch Lg Tv would hold the Tv and is this swival?

A: Hi Lindsay, thanks for reaching out about the Full Motion 40" - 90" TV Mount - dealworthy. The Full Motion 40"-90" TV mount VESA Mounting Standard is 600x400. It would not be compatible with Onn 50” 4K UHD Roku TV VESA Hole Pattern (W x H) 400 x 300 mm If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.

A: Hi, Tee - Thanks for asking! The Full Motion 40"-90" TV Mount is not compatible with 18-inch stud spacing. The wall plate is specifically designed for standard 16-inch studs, and its mounting slots are not wide enough to bridge an 18-inch gap securely. Have a great day! - Ryan

A: Hello KB - Thank you for reaching out. We would be glad to assist you further. Please contact us directly to resolve your concern at 1-800-591-3869 or email guest.relations@target.com. We look forward to hearing from you shortly! - Cynthia

A: Hi Buvaguy, Thanks for contacting us. The VESA hole fits 100*100, 200*100,200*200, 200*300, 200*400, 300*200,300*300, 400*200,400*300, 400*400, 600*400, and supports 16",24" wood stud and concrete wall, weight capacity of up to 120lbs.

A: Hi Belinda, thanks for contacting us. This wall mount can fit the 85" TVs. Please also check the VESA holes (Min. 100x100mm, Max. 600x400mm) on the back of your TV and make sure the TV weight along with accessories is under 120lbs.

A: Hello Christy - We appreciate your interest in this Full Motion 40" - 90" TV Mount. It is designed to accommodate TVs ranging from 40 to 90 inches and holding up to 120 pounds. We know you will love it. – Ryan