LEVOIT Vital 200S-P Air Purifier for Home with Pet Mode for Pet Hair and Dander Control Sleep Mode White Gray

A: Our units feature a 3-stage filtration system including a high-efficiency carbon filter to help remove odor particles. For best results, we recommend minimizing the source of the smell as best as possible first. The air must also pass through the filters a few times.

A: The Vital 200S uses the Vital 200S-RF replacement filter.

A: It employs a three-stage filtration system that captures 99.97% of airborne particles down to 0.3 microns.

A: It has a wide U-shaped air inlet designed to efficiently catch airborne pet fur and prevent clogs.

A: Auto Mode automatically adjusts the fan speed based on real-time air quality readings.

A: In sleep mode, the purifier operates at low noise levels, as quiet as 23dB.

A: Yes, you can control settings and schedules through the VeSync app on your smartphone.

A: Both the pre-filter and the main filter use PP and PET composites. The carbon in our filters is activated carbon, in which the main material is coal.

A: This listing is for the white-and-gray version of the Vital 200S.

A: If the Air Quality Indicator is red (indicating “Bad” air quality) more than usual, you may need to clean your dust sensor. How often you clean the dust sensor will depend on the air quality of your environment. If your air is often polluted with dust, dander, smoke, and other particles, you may need to clean your dust sensor more often. To troubleshoot the dust sensor/air quality reading, please try the following: 1. With the unit off, gently blow on the dust sensor of the air purifier, located on the back or side of your unit. ** As an alternative, you can also use a cotton swab dipped in water to clean the dust sensor lens and then wipe the lens dry with a dry cotton swab. 2. Turn the unit on and run the air purifier at the highest manual fan speed for approximately one hour.