A: Hello, thank you for your question! The bottom of the mounting bar on the latch side of the gate is approximately 5.25" from the floor.
A: Hello, thank you for your question! This model requires the bumper to be 100% on a flat surface, we do not recommend using wood spacers to install the gate.
A: Hello, thank you for your question! Yes, the gate panel can be removed from the hinges and the hinges remain on the wall.
A: Hello! The gate will need to fit flush against the surface on both sides of the gate.
A: Hello there. We have not tested with installation kits and do not manufacturer any. We do not recommend using after market items with our products as they have not been safety tested.
A: Hello there! The Safety 1st Ready to Install baby gate includes hardware for mounting the unit. We must properly label the child product for safety.
A: Each of the mounting bars is approximately 23.5" long. On the latch side, the mounting screws are approximately 14.25" apart. On the hinge bracket side, there are screws at 4 locations. There is one screw at the top, one screw at the bottom and the brackets in the center are approximately 13" apart.