The listings show tee lengths ranging from 1.0 inch up to 7.0 inches. Common lengths called out include 1.0", 1.5", 1.75", 2.75", 3.25", 4.0", and longer options up to 7.0".
One listing explicitly labels the 4.0-inch tee as "the longest allowed by USGA and R&A."
Typical recommendations in these listings are: irons/hybrids — about 2 1/8"; drivers (standard) — about 2 3/4"; higher driver setups — around 3 1/4". A 4" tee is noted as the longest option.
The listings list tees made of plastic (including proprietary plastics), all-wood, and ABS (Acrylonitrile Butadiene Styrene) plastic.
Listings call out these design features: low-resistance or low-friction tips/heads to reduce contact with the ball, and a flexible elastomer crown with individual "fingers" that flex at impact. These elements are described as reducing resistance at contact and helping lower ball spin.
Several listings describe their plastic tees as reusable and longer-lasting than wood. Some mention proprietary plastics or multi-material designs that can tolerate 100+ hits and resist breaking, positioning them as more durable than standard wooden tees.
Some tees include built-in height guides such as a raised gauge, color bands, or striped markings so you can place the ball at the same height every shot.
The wooden tees are described as traditional all-wood construction and are promoted as strong enough to be pushed into hard ground without bending or breaking, emphasizing their sturdiness compared with thinner wooden tees.
Common head/tip designs cited include low-resistance or low-friction tips, flexible elastomer crowns with individual fingers, and conventional flat or cupped wooden heads — all intended to reduce contact resistance and protect the ball at impact.
