Sponsored
Nite Ize Steelie Squeeze Clamp - Magnetic Cell Phone Holder for Dashboard, Vent & Windshield
$22.79
In Stock
Eligible for registries and wish lists
Sponsored
About this item
Highlights
- Universal Fit: The squeeze clamp mount fits most standard and plus-sized phones, including a case and accessories, up to 2.3" to 3.6" wide, including the IPhone 12 Pro Max, IPhone 12 Mini, Samsung Galaxy, and more
- Easy to Squeeze: The squeeze car mount holder features two levers at its base that require a simple pinch of your thumb and index finger to open the clamp and place your phone, no extra grip needed
- Holds strong through it all: Don't be fooled by its easy-to-squeeze nature, the squeeze clamp features inner continuous force springs that amplify the hold of your phone, along with grippy arms to keep it in place through every twist and turn
- Compatible With MagSafe and More: Squeeze is compatible with MagSafe chargers, accessories, and other wireless charging pads, while also allowing for easy changing of cases and phones
- Smooth Adjustment and 360° Rotation: The squeeze clamp magnetically attaches onto the steel ball of the dash mount, allowing for smooth adjustment and hands-free viewing at any angle
Description
The Steelie Squeeze Clamp welcomes virtually any phone with open arms, requiring an effortless pinch of the levers to place and secure your phone. Fitting phones with a case and accessories 2.3 inches - 3.6 inches wide. The Squeeze features grippy arms and inner continuous force springs to keep your phone in place. Instead of a magnetic socket on your phone, the magnet is found on the back of the Clamp, allowing you to pair it with your favorite Steelie mount of choice and share with other drivers or passengers of your vehicle. By integrating the power of Steelie into the modern Squeeze design, users can still experience the same smooth 360 rotation and secure hold that only Steelie can deliver. And as an added bonus, when the Squeeze Clamp is on your phone, it can magnetically connect to any magnetic surface and is also compatible with MagSafe phones, cases and wireless chargers. Contains: Squeeze Clamp with Magnetic Phone Socket Plus.
Dimensions (Overall): 1.7 inches (H) x 4.1 inches (W) x 6 inches (D)
Weight: .29 pounds
Mount Type: Magnetic Mount
Material: Steel
Battery: No Battery Used
Warranty: No Applicable Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, please call Target Guest Services at 1-800-591-3869
TCIN: 89821900
UPC: 094664051003
Origin: imported
The above item details were provided by the Target Plus™ Partner. Target does not represent or warrant that this information is accurate or complete. On occasion, manufacturers may modify their items and update their labels.
We recommend that you do not rely solely on the information presented. If you have a specific question about this item, you may consult the item's label, contact the manufacturer directly or call Target Guest Services at 1-800-591-3869.
If the item details aren’t accurate or complete, we want to know about it.
Shipping details
Estimated ship dimensions: 6 inches length x 4.1 inches width x 1.7 inches height
Estimated ship weight: 0.29 pounds
item ships from third party seller: Pattern
Return details
This item can be returned to any Target store or Target.com.
This item must be returned within 30 days of the date it was purchased in store, shipped, delivered by a Shipt shopper, or made ready for pickup.
See the return policy for complete information.
Q: How does the clamp secure the phone?
submitted by AI Shopping Assistant - 18 days ago
A: It uses inner continuous force springs and grippy arms to hold the phone securely in place.
submitted byAI Shopping Assistant - 18 days agoAi generated
Q: What types of phones can the clamp hold?
submitted by AI Shopping Assistant - 18 days ago
A: The clamp fits most standard and plus-sized phones, including models like iPhone 12 Pro Max and Samsung Galaxy.
submitted byAI Shopping Assistant - 18 days agoAi generated
Q: What is the rotation capability of the clamp?
submitted by AI Shopping Assistant - 18 days ago
A: The clamp allows for smooth adjustment and 360-degree rotation for hands-free viewing.
submitted byAI Shopping Assistant - 18 days agoAi generated
Q: Is the clamp compatible with wireless charging?
submitted by AI Shopping Assistant - 18 days ago
A: Yes, it works with MagSafe chargers and other wireless charging pads for convenience.
submitted byAI Shopping Assistant - 18 days agoAi generated
Q: Can I use this with a phone case?
submitted by AI Shopping Assistant - 18 days ago
A: Yes, the clamp accommodates phones with cases and accessories up to 3.6 inches wide.
submitted byAI Shopping Assistant - 18 days agoAi generated
Guests also viewed
$13.09 - $14.99
reg $17.49 - $19.99 Sale
5 out of 5 stars with 1 ratings
$24.95
reg $39.95 Sale
3.8 out of 5 stars with 6 ratings
$11.99 - $14.99
reg $29.99 - $39.99 Sale
Discover more options
Related Categories
Guests are saying
The Steelie Squeeze Clamp is a versatile and reliable phone holder that securely accommodates various phone sizes and cases. Guests appreciate its ease of use, with a simple squeeze mechanism for attaching and releasing phones. Many find it a significant improvement over previous models, especially for daily use in vehicles. However, some guests have noted issues with stability and the need for two hands to operate it effectively, which may affect convenience during driving.
Summary created by AI from text of reviews reflecting recent feedback provided across different star ratings (includes incentivized reviews)
4.1 out of 5 stars with 33 reviews
4 out of 5 stars
12 June, 2025
originally posted on niteize.com
Solid mounting system
Holds all phones well. With my windshield mount, it does tend to start pointing the phone downward over time. Needs two hands to use. Mechanism isn’t complicated and likely won’t fail for a while; I’m about a month or so in.
5 out of 5 stars
10 April, 2025
originally posted on niteize.com
exactly like I was expecting
Works great! exactly like I was expecting
4 out of 5 stars
13 January, 2025
originally posted on niteize.com
Review of Steelie Squeeze Clamp
I have an older mount. It seems that the socket diameter is smaller than the older ball I have. This means the rubber (silicone) insert does not have the optimal contact area on the ball. This causes "droop" or slow position changes when driving especially over a bumpy road. I was considering putting a bead of silicone over the current insert. Also, the release levers are a little too short, but then again I have a big phone; a Samsung Galaxy S-21 Ultra 5g in a Samsung factory case with the pen holder on the side. That all said, I am very happy with the setup and the fact replacement parts are available.
5 out of 5 stars
24 December, 2024
originally posted on niteize.com
Steelie Squeeze Clamp holder works great
I've owned the predecessor to the Squeeze clamp that worked okay, but not nearly as well as the Squeeze action. I have replaced both of my previous models with the Squeeze Clamp model. The clamp action is easy to use and adjust my phone up or down as needed. It securely holds my phone. I have no issue recommending it.
3 out of 5 stars
17 December, 2024
originally posted on niteize.com
Ok item.
Item works fine. A bit difficult to release phone due to location of clamp handle for release.
5 out of 5 stars
12 November, 2024
originally posted on niteize.com
Steelie Squeeze Clamp
Product is an improvement over the old window attachment product. This one is very easy to use. The squeeze clips to attach the phone make sense and are much improved over the older version. I use it every day and it is simple and easy to clip my phone into the bracket. Release is just as easy, just squeeze the clips and its out.
5 out of 5 stars
20 September, 2024
originally posted on niteize.com
Steelie Squeeze Clamp Review
I like the Steelie Squeeze Clamp very much. It holds my cell and case securely. It pairs very well with my Steelie Windshield Suction Holder.
5 out of 5 stars
19 August, 2024
originally posted on niteize.com
He needed a new phone holder.
I have a phone holder in each car. Husband didn’t want one , but I put one in when we drove a long trip. He realized how nice it was to have the phone were you could see it as he drove. Last phone clip died. He asked for a new one. He likes this one better. Says it is easy to use and holds his phone better.
5 out of 5 stars
14 June, 2024
originally posted on niteize.com
As described
Works as described; so far no issues w/ the weight of my iPhone 15 Pro nor case it is in.
1 out of 5 stars
6 June, 2024
originally posted on niteize.com
does not work
The clamp is not long enough to stay securely attached to vent. Falls out 100% of the time. I am very disappointed.
1 reply from Customer Service team - 1 year ago
We are sorry to here that the clamp on the Steelie Squeeze Vent kit did not work for you in your car. We would be happy to help troubleshoot a solution or send you a replacement through our Worry-Free Guarantee. Just reach out to us at info@niteize.com and we will make sure you are taken care of.
5 out of 5 stars
29 May, 2024
originally posted on niteize.com
Good phone holder
Real strong magnet holds things up nicely. The fancy continuous pressure spring system holds the phone securely. Well worth the money
1 out of 5 stars
28 February, 2024
originally posted on niteize.com
Magnet is not strong enough to hold my phone up.
The clamp holds the phone securely. However the magnet does not hold the clamp in an upright position. Every slight bump in the road droops phone downwards such that the display of the phone on angle where the display is in readable. This is the second Steelie I have tried. I my opinion this design is worthless. I wish I could have my money back. Don’t buy this. It is a waste of money.
1 reply from Customer Service team - 2 years ago
Hi there, we are sorry to hear about your experience with our Steelie Squeeze, we would be happy to talk through some troubleshooting options with you and the Worry-Free Guarantee that we have on all of our products. Please reach out to us at info@niteize.com and we can talk through some solutions.
5 out of 5 stars
25 September, 2023
originally posted on niteize.com
Absolute awesome product!
These things are awesome! Extremely easy to use, very handy and the springs don’t get weak. I’ve had 1 for almost a year and it’s still as strong as the new 1 I just got.
5 out of 5 stars
14 August, 2023
originally posted on niteize.com
Good product
Easy and secure. Great improvement from the previous model.
1 out of 5 stars
28 June, 2023
originally posted on niteize.com
If it ain't broke don't fix it.
I had your previous version of this. The previous was better by far. It took 1 hand to operate and stayed where you put it. This new one requires two hands and about every 2 mins I have to push my phone back up.
5 out of 5 stars
23 May, 2023
originally posted on niteize.com
love this
This was a replacement oil change store lost mine and I was without for about 2 weeks and I missed my holder.
5 out of 5 stars
4 April, 2023
originally posted on niteize.com
5 Star Phone holder
I absolutely love this product. This Steelie Squeeze Clamp holds my phone (with a big Otterbox case on it) like a vise. Well done guys. Great job. I'm so confident using this SteeIie Squeeze Clamp that I bought 2 more.
5 out of 5 stars
7 January, 2023
originally posted on niteize.com
Nothing compares
I have had mine for about 6 months now and I will never buy anything different. It is hands down the best!
1 out of 5 stars
19 December, 2022
originally posted on niteize.com
Waste of money
Product does not work. Clamp and phone together are too heavy and will not hold phone upright. It was a waste of money.
1 reply from Customer Experience team - 3 years ago
Hi! Sorry about this issue! Feel free to reach out to us at info@niteize.com with a photo of your setup so we can help troubleshoot -- or get you going with an alternate phone mount under our Worry Free Guarantee.
5 out of 5 stars
4 December, 2022
originally posted on niteize.com
My favorite Steelie!
Holds my phone perfectly, already had a ball mount installed from a previous mount so just needed the clamp, and can be moved from vehicle to vehicle, thank you nite ize for the variety of solutions!