About this item
Highlights
- Integrated LATCH connectors click right to your vehicle's anchor points in seconds so installation is quick, painless and super secure
- This carrier clicks onto the Nutmeg stroller without adaptors so you can switch between driving and walking in seconds without disturbing baby!
- Built-in LATCH connectors lock the seat directly to a vehicle’s anchor points – no belt or base needed – so carpooling and babysitting handoffs have never been easier
- Weighing ≥ 15 lb., this lightweight stroller is effortless to lift and store, but mighty enough to transport your kiddo and all their essentials
- Use this stroller from baby’s day one, either paired with a compatible infant car seat or with the stroller seat lying in a near-flat position and occupant retention for better breathing and spinal development"
Description
• At ≥15 lb., this lightweight stroller is effortless to lift and store. (select colors/fabrics may incur additional weight)
• Nutmeg’s instant one-hand fold is designed for parents whose hands and bandwidth are full
• Use this stroller from baby’s day one, either paired with a compatible infant car seat or with the ergonomic stroller seat lying nearly flat
• Step down on the one-tap shoe-saver brake to lock your stroller in place without scuffing your shoes or scratching your toes
• Removable cupholder keeps your beverage close so you can stay hydrated (or caffeinated!) through your busy day
TOP MINT LATCH™ FEATURES
• Integrated LATCH connectors click right to your vehicle's anchor points in seconds so installation is quick, painless and super secure
• The built-in LATCH connectors adjust to three different angles, so a level car seat installation in any backseat is perfectly simple
•This carrier clicks onto a compatible Joie stroller so you can switch between driving and walking in seconds without disturbing baby!
• Mint latch™ meets the newest, standards for side and frontal impact protection to shield your child from crash forces that could occur during a crash
•Jet-setting parents, we see you! This carrier is FAA certified for aircraft use with the seat belt!
Shipping details
Return details
Q: Does this not come with the care seat base?
A: It doesn’t need a base
submitted byAnon - 5 months agoA: Doesn't need a base.
submitted byMana - 9 months agoA: No it comes without a base. You do not need a base with this car seat because the latches are already built in.
submitted byNia - 9 months agoA: The mint latch™ is a baseless car seat. It can be installed as easily (or easier) as a base by rotating the rigid LATCH out and clicking on your vehicle's anchor points. When installing using any method, make sure the car seat is level, and the indicators on the LATCH connectors are green. Do not install with both LATCH and the seat belt, choose only one means of installation.
submitted byJoie - 8 months agoBrand expert
Q: Has anyone tried to lay their newborn flat in the stroller by laying the back all the way down? Is it safe to do so?
A: Personally I don’t like or recommend it, it’s not flat like a bassinet so I feel like baby isn’t secure
submitted byAshley R - 2 months agoA: I feel like it’s safe. We’ve used it from when baby was only 1 week old and had no concerns with it.
submitted byBri - 29 days agoA: Thanks for reaching out. The nutmeg stroller can be used from birth on it's own or with a joie infant car seat as a travel system. To use the stroller from birth the seat must be fully reclined, the calf-support must be fully raised and the closure flaps attached.
submitted byJoie - 3 months agoBrand expert
Q: How can you measure/decide if the mint infant car seat -maple is compatible with/fits correctly in your vehicle?
A: Thank you for your question. The mint latch is a baseless infant car seat that can be installed using most cars' rigid lower anchor attachments. The vehicle manufacturer determines the dimensions and specifications of the lower anchors in your car, which can vary from car to car. You should measure from the middle of each anchor point in your vehicle; if it is approximately 11 inches, the mint latch should fit. If you can not use the lower anchor attachments in a car, you can still install the mint latch without a base using the vehicle seat belt.
submitted byJoie - 1 month agoBrand expert
Q: Is this a grow with me car seat? Can it be used as a convertible car seat and soon be turned to the front?
A: No this is an infant car seat only
submitted byBre - 4 months agoA: The mint latch infant car seat is an infant rear-facing only seat. It can be used until your child reachs 30 lb. or 30 inches.
submitted byJoie - 4 months agoBrand expert
Q: Can the car seat fit maxi cosi attachments for other strollers/wagons?
A: Thanks for your question. The mint latch™ car seat has not been tested with strollers other brands, so we cannot recommend using it with anything other than joie™ strollers at this time.
submitted byJoie - 6 months agoBrand expert
Q: Can the stroller seat be removed when using the car seat on the stroller?
A: No, the seat is always on.
submitted byEm - 9 months agoA: The nutmeg™ and mint latch™ travel system provides added convenience by being able to put the mint latch™ directly onto the nutmeg™ stroller without the hassle of needing to remove the seat.
submitted byJoie - 8 months agoBrand expert
Q: Does the travel system also have the "newborn nest" that secures the foot support when folded up for recline shown on the standalone stroller?
A: Yes it does have a newborn nest on this version.
submitted byEm - 9 months agoA: All nutmeg™ strollers, whether sold alone or as a travel system, have the newborn nest (or occupant retention).
submitted byJoie - 8 months agoBrand expert
Q: Can this stroller be used for both my newborn and my 3-year-old at the same time? If so, does it come with or support an attachment for a car seat for the baby and a toddler seat for my older child?
A: Thanks for reaching out. The nutmeg stroller is a single stroller meant for one child at a time. It can be used from birth as a travel system or the newborn nest. It can be used up to 50 lb. as a regular stroller.
submitted byJoie - 12 days agoBrand expert
Q: I just got this stroller today and can not figure out how to fold it where it stands up on it's on. All the reviews I watch say it should. Any tips?
A: Thanks for your question. Nutmeg does stand on its own. If you are having issues, try these things: - Make sure all the wheels are unlocked - Before you fold it, reverse the stroller for a few inches; this will move the front wheels 'backward', which can sometimes help ensure a smoother fold and keep the stroller more balanced for standing. - Ensure that the basket is empty. If you're still experiencing issues, please reach out to us on social, and we'll be happy to help.
submitted byJoie - 11 days agoBrand expert
Q: Does this fit comfortable in the backseat of a Toyota Tacoma? We’re having a hard time finding a stroller/car seat that fits well in this vehicle. Thanks
A: Thanks for reaching out. The cab size of your truck will determine if the car seat will fit. The length of the bottom of the mint latch car seat is approximately 16 inches. Joie uses the 80/20 rule - the vehicle seat must support 80% of the car seat, and 20% can hang over the edge of the vehicle seat.
submitted byJoie - 16 days agoBrand expert
Frequently bought together
More to consider
Discover more options
Related Categories
- Travel System Strollers
- Infant Car Seat Compatible
- Rear-Facing Car Seats
- Graco Travel Systems
- Modular Strollers
- Premium Strollers