Novelty Sunset Lamp - White

A: Hi, thanks for reaching out about Novelty Sunset Lamp - White. Adjusting the brightness of a Novelty Sunset Lamp depends on which specific version you have, as many of the "white" models (often sold at Target or Amazon) use a hidden touch-sensor instead of a traditional remote. Here are the three most common ways to dim it: 1. The "Touch & Hold" Method (Most Likely) Most sleek, white novelty sunset lamps use a single touch-sensitive button on the top or back of the lamp head. To turn on/off: Tap the sensor quickly once. To adjust brightness: While the lamp is on, press and hold your finger on the sensor. The light will gradually cycle from dim to bright. Lift your finger when it reaches the level you like. 2. The Remote Control (If Included) If your lamp came with a thin, plastic remote, look for the sun icons at the very top. Sun with Up Arrow / Full Sun: Increases brightness. Sun with Down Arrow / Half Sun: Decreases brightness. Note: Ensure the plastic battery tab has been pulled out of the bottom of the remote for it to work. 3. The Inline Cord Switch If your lamp has a bulky plastic box on the power cord with several buttons: Look for the "+" and "–" buttons. Clicking these will step the brightness up or down. If there is only one button on the cord, it is likely a simple on/off switch, and you should check the lamp head for the "Touch & Hold" sensor mentioned in step 1. Pro-Tips for the Best "Vibe" Distance = Size: To get a larger "sunset" circle, move the lamp further away from the wall. To make it more intense and small, move it closer. The 10ft Cable Connection: Remember that 10ft USB-A to USB-C cable we talked about? If the cable that came with your lamp is too short to reach your nightstand, that 10ft dealworthy cable is perfect for powering this lamp since it doesn't require high-speed data. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.

A: Yes, the lamp features adjustable brightness settings for customized lighting.

A: The charging time for the lamp is approximately 2 hours.

A: Yes, it has a one-touch on/off feature for convenience.

A: The lamp uses a built-in lithium-ion battery for power.

A: The lamp can run for 1 to 4 hours depending on the brightness setting.