A: I think it is just an indicator of the end of the cord
A: Thank you for your interest in this Black + Decker iron. The red tape on the cord indicates the maximum length the cord should be extended. Please do not attempt to pull the cord out any further, as there may not be enough tension left to retract the cord properly. If you need further assistance, I’d be happy to help! Please contact us at youropinionmatters@spectrumbrands.com and reference 42009816 so that we may better assist you.
A: Thank you for your interest in the Black+Decker Steam Iron. To turn this iron off when it is not in use, you will need to turn the iron to the lowest temperature setting, and then unplug it since it does not have an off button. If you need further assistance, I’d be happy to help! Please contact us at youropinionmatters@spectrumbrands.com and reference ID number 42337494 so that we may better assist you.
A: Thank you for your question regarding your Black+Decker Steam Iron. When the indicator light is flashing on your iron, the iron has gone into the auto off mode. To turn the iron back on, you will need to move the iron, and it will turn back on and start to heat back up. If you need further assistance, please contact me at youropinionmatters@spectrumbrands.com and reference ID number 42297148 so that I may be able to better assist you.
A: Thank you for providing your feedback regarding your Black+Decker Steam Iron. We do apologize, but our irons do not come with a measuring cup any longer. However, you can use a standard clean measuring cup when adding iron. Our irons hold between approximately 1/4 cup to 2 cups of water. If you need further assistance, please contact me at youropinionmatters@spectrumbrands.com and reference ID number 42288550 so that I may be able to better assist you.
A: Thank you for your interest in the Black+Decker Steam Iron. This iron does have the three way automatic shut off feature. If you need further assistance, I’d be happy to help! Please contact us at youropinionmatters@spectrumbrands.com and reference ID number 42268946 so that we may better assist you.
A: Thank you for your interest in this Black+Decker iron. The following is a list of approximate iron temperature settings: 1 - Synthetic -103 degrees C (217 degrees F) 2 - Nylon/Silk- 112 degrees C (234 degrees F) 3 - Polyester/Rayon- 128 degrees C (262 degrees F) 4 - Cotton Blends- 147 degrees C (297 degrees F) 5 - Wool- 172 degrees C (342 degrees F) 6 - Cotton/ Linen- 190 degrees C (374 degrees F) If you need further assistance, I’d be happy to help! Please contact us at youropinionmatters@spectrumbrands.com and reference 42265987 so that we may better assist you.
A: Thank you for your interest in the Black+Decker Steam Iron. This iron operates at 1,200 watts, 120 volts, 60 hertz, and 10 amps. If you need further assistance, I’d be happy to help! Please contact us at youropinionmatters@spectrumbrands.com and reference ID number 42252877 so that we may better assist you.
A: Thank you for your interest in the Black+Decker Steam Iron. No, this iron does not have a beep to indicate when the iron is heated to the proper temperature, or when it is about to shut of. If you need further assistance, I’d be happy to help! Please contact us at youropinionmatters@spectrumbrands.com and reference ID number 42193255 so that we may better assist you.
A: Thank you for your interest in this Black+Decker iron. The model number of this iron is ICR15X. If you need further assistance, I’d be happy to help! Please contact us at youropinionmatters@spectrumbrands.com and reference 42172090 so that we may better assist you.
A: Thank you for your interest in this Black+Decker iron. Under the Key Features section there is a Specifications box that indicates this Black+Decker iron requires a 120 Volts – 60 Hz electric power service, such as that which is used in North America. Please do not attempt to use this iron with any other electric power service.