48"-88" Loft By Umbra Room Darkening Curtain Rod Darjeeling Bronze: Adjustable Steel Rod, Metallic Finish, 25lb Capacity

A: I bought the smaller size and it did not come with (nor did it need) a support in the center.

A: Hello Stacy, If you are still having troubles or have additional questions, please contact our customer support team here: https://www.umbra.com/pages/contact-us Sincerely, Umbra

A: Yes, the longer size does include a center support.

A: Hello HelpPlease, If you are still having troubles or have additional questions, please contact our customer support team here: https://www.umbra.com/pages/contact-us Sincerely, Umbra

A: You just unscrew it and the rod comes out and curtains off.

A: The rod screws into the brackets on either side (like a toilet paper holder, only it screws in). Once you screw the brackets into the wall, you leave them alone. To remove the curtain, with your hand you unscrew the rod from the bracket on the right side, telescope the rod in by moving it to the left, and pull your curtain off. To put it back together, you just telescope the rod back to mate up with the bracket, and screw it back in with your hand.

A: Hello Ahava45, If you are still having troubles or have additional questions, please contact our customer support team here: https://www.umbra.com/pages/contact-us Sincerely, Umbra

A: Yes. That’s what I have on mine

A: I bought it for the same reason. It works great for me. I would say the only thing that might affect would be if you have an east facing window that more light would get through due to the fact that it does extend out from the window a bit. Light could potentially shine in above. My solution to hiding light hitting the ceiling was mounting the rod above the window several inches and used a longer cutrtain.

A: Yes. We used Deconovo fleece lined grommet drapes (heavy), and the rod never bent, was sturdy, and the right clearance so that the curtain hugged the window and sides. Helped tremendously with a bedroom with a very cold window /draft in winter time.

A: It's an inch and a half from the center of one hole to the center of the other.

A: it is 1 9/16 inches from the top screw hole to the bottom one measured center to center

A: Hello Alex, If you are still having troubles or have additional questions, please contact our customer support team here: https://www.umbra.com/pages/contact-us Sincerely, Umbra

A: 3" from the wall to the farthest side of the rod

A: Hello Jeanie, thank you for your question. This curtain rod can be adjusted anywhere between 28" - 48" inches. Hope this helps, Umbra

A: Hello Plee, thank you for your question. The Umbra curtain rod diameter is 5/8" inch. Hope this helps, Umbra

A: Hello Rebeka, thank you for your question. The overall dimension include the finials. Hope this helps, Umbra

A: Hello GM, thank you for your question. You can technically choose where you want to put the brackets. However, we recommend the center support to go in the middle of the rod. Hope this helps, Umbra