Warranty: 1 Year Limited Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, please call Target Guest Services at 1-800-591-3869
Item Number (DPCI): 070-05-1118
This hardworking thermometer from Taylor is a great tool for every home cook. It gives you rapid temperature readings, has a wide temperature range and can hold readings even after its been removed from your food. This thermometer is also IPX5 water-resistant for worry-free handwashing after use. Using advanced thermocouple technology, this Taylor thermometer reacts faster to changes in temperature and gives a more stable reading than traditional thermometers. It provides a stabilized reading in 6 seconds or less in food, reading temperatures ranging from -40°F to 572°F.
The ultra-thin 1½-mm tip leaves a much smaller hole in your food, so fewer flavorful juices will escape as you check the temperature throughout the cooking process. Also features a HOLD function, which stores the temperature of your food on the bright red backlit display even when removed. The 4" stainless steel probe folds into thermometer casing for storage and acts as the ON/OFF switch.
QUALITY AND PRECISION: Taylor has been making precision products for kitchen measurement for over 170 years, using only the highest quality components for accurate temperature tracking. Measure precisely in both Fahrenheit and Celsius units.
CONVENIENT FEATURES: HOLD function locks temperature into place on the display even when the thermometer is removed from the food.
HIGHLY ACCURATE: Extra-wide temperature range: -40F to 572F / -40C to 300C. IMPORTANT: The F/C switch is located in the battery compartment.
BATTERY INCLUDED: Operates on one CR2032 battery (included).
HELPFUL HINTS: Digital thermometers are NOT meant to be left in food during cooking. The plastic and electronic components could be damaged with excessive heat.
NOTE: The display will go dim during use to conserve battery life, active temperature monitoring is still occurring - press the HOLD button to reactivate the display.
One (1) year limited warranty (excludes batteries)
Battery Power Source
Product is powered by battery
If the item details above aren’t accurate or complete, we want to know about it.
Estimated ship dimensions: 7.51 inches length x 4.91 inches width x 0.93 inches height
Estimated ship weight: 0.14 pounds
We regret that this item cannot be shipped to PO Boxes.
This item cannot be shipped to the following locations: United States Minor Outlying Islands, American Samoa (see also separate entry under AS), Puerto Rico (see also separate entry under PR), Northern Mariana Islands, Virgin Islands, U.S., APO/FPO, Guam (see also separate entry under GU)
This item must be returned to any Target store.
This item must be returned within 90 days of the date it was purchased in store, shipped, delivered by a Shipt shopper, or made ready for pickup.
Q: How do you recalibrate the probe? It started reading way off.
submitted by Sarah - 8 months ago
A: Hi Sarah, Here are the directions for recalibrating your thermometer. 1. Fill a container with crushed or chipped ice. 2. Add water slowly until it overflows. 3. Add more ice until it is packed tightly to the bottom of the container, allowing excess to overflow. 4. Insert the stem of the thermometer at least 2” into the container, making sure it does not touch the sides or bottom of the container, and allow it to stabilize for 5 minutes. 5. If the temperature reading is 32°F (0°C), the thermometer is accurately calibrated. 6. If it is necessary to adjust the thermometer, press and hold the “Hold” button for 3 seconds. 7. The display will show “CALu” and enter user calibration mode. 8. When the LCD flashes, press and hold the “Hold” button for another 3 seconds to adjust the calibration value. 9. The thermometer is now calibrated. 10. If the “Hold” button is not press within 5 seconds when the LCD is flashing, the calibration mode is automatically exited back to normal operation. If you have any other questions, please reach back out. Thanks!
Completely unpredictable operation. So far I can only take I one temp and have to fold it up and open it again to reset it for it to work again. Even then it doesn’t always work. Frustrating piece of equipment.