A: Thank you for your question. The Gathered Home Gate consists of three sections that are tri-folded in the packaging. When you remove the gate from the packaging, simply unfold the two end panels as far as needed to reach 60 inches. Please note, the gate will only fit a space of 72" in a straight line. To accommodate smaller spaces, the gate will be arced as the end panels will not be completely extended.
A: Thank you for your question. Yes, the Gathered Home Gate does require being attached to a solid surface, such as a wooden stud, with screws.
A: Thank you for your question. The gate mounts are affixed to the gate frame and not removable. We do not recommend altering the gate in any manner.
A: Thank you for reaching out to us with this question. Yes, the gate easily removes from the mounted hardware by simply releasing a button on each mount, allowing it to be folded and stored.
A: Thank you for your question. The Gathered Home Gate fits spaces between 38.3 and 72". It will fit your space of 61". It will require an angle being placed into either of the pivot points and will not fit in the space straight across.
A: Thank you for your question. The Gathered Home Gate fits spaces between 38.3 and 72". It will fit your space of 61". It will require an angle being placed into either of the pivot points and will not fit in the space straight across.
A: Thank you for your question. The door panel cannot be relocated. The two side panels contain the fittings that attach to the wall, therefore, they must remain on the ends.
A: Thank you for your question. The upper mounting piece is approximately 3.5"H x 1.5"W. The lower mounting piece is approximately 3"H x 1.5"W. They do not have the ability to pivot and do require being installed onto a flat surface. The gate has the ability to meet the mounting pieces at an angle. The gate does not need to be installed with the pieces pressing against the door jam; the location for this gate just happens to be located directly next to a door jam.
A: Thank you for your question. The Gathered Home Gate requires a flat, solid surface for mounting. While it can be attached to a banister, the surface of the banister must be flat. Additionally, the gate must be attached to the banister by using the screws that are included in the hardware package and cannot be mounted without drilling holes into the surface.
A: Thank you for your question. Yes, the 15" extension model 4938 is compatible with the Gathered Home Gate (model 4928), as well as the Deluxe Decor Gate (model 4934).