deer feeder gravity feed

These feeders are intended for non‑salt‑based feeds such as corn and protein pellets. Product details warn that salt‑based mineral supplements may damage the feeder, so avoid those unless the listing explicitly allows them.

Feed flow is controlled by an adjustable internal 3‑way sleeve and by the slow‑feed port design. The ports are angled (about 10°) and sized to slow discharge; they also include drain holes and a 1‑inch overhang at the port end to reduce spillage.

These feeders typically use a roto‑molded plastic barrel with galvanized hardware. Some listings also list metal components for particular parts—check the item details for the exact materials used on the model you’re considering.

No. These are gravity‑fed feeders and do not require power or batteries. Product details state “Battery: No Battery Used.”

Dimensions vary by model. Many listings show overall dimensions about 29 x 25 x 25 inches, while some descriptions also note tripod legs of 75 inches. Because listings differ, verify the specific product page for the exact overall dimensions and leg/stand height before purchasing.

Adult assembly is required and tools are not provided with the product. Check the product listing for any assembly instructions or parts lists included with the feeder.

The ports include drain holes to shed rainwater, are angled (about 10°) to slow feed flow, and feature a 1‑inch overhang at the port end to help keep feed from spilling out.