U Brands 16"x20" Pin-it Frame Magnetic Dry Erase Board Value Pack: Wall Mount Whiteboard with Magnets & Marker

A: They snap in. Take the marker out of the clip first. Then position the clip where you would like it to be attached. Snap the clip onto the rail by pushing it very hard or it won't clip in.

A: Hello helpme, We are sorry to hear the marker clips are being tricky. They clip into the channel on the long edges of the frame. an image of the channel can be seen in the 4th product image online.

A: Hi Jes, Our U Brands Utility Cup will attach to the board and hold the pens. It is sold separately. Thanks! Jordan

A: First the two dry erase pens come with mounting clips that clearly are not made to attach to this board unless you are a miracle worker. The instructions never mentioned the clips or how to mount them. I mounted them to the top of the board with some hot melt glue. They have been in place for months. Second, the mounting hardware that comes with the board does not actually mount the board to a wall. There are two plastic tabs that you nail to the wall but when trying to place the board on the tabs it is clear that the system doesn't work and the directions don't help.. It also included one piece of double sided tape for the bottom of the unit which I never used. I used four screws (my own from my junk box collection of hardware) to mount it using the four keyed mounting holes. I dabbed some white glue around each of the four holes then when I was satisfied with the alignment of the board on the wall I press it against the wall and carefully withdrew it. This left four 'glue' impressions on the wall. Now I only needed to mount a screw in the center of each impression. Then clean off the glue and mount away. The frame of the board started to come apart so I clamped the board while using some plastic epoxy to hold it together. The reason I recommend this board is because it erases the writing very cleanly even if I use a different dry erase pen. You would be surprised how many dry erase boards won't completely erase your message. The cork part and the magnets are another plus.

A: The pack includes two dry erase markers, two plastic magnets, and ten push pins.

A: It wipes clean easily with minimal ghosting, ensuring a fresh writing surface.

A: The board features an easy mounting system that requires no drilling for installation.

A: The board includes a magnetic surface, cork strip for pinning, and comes with markers and magnets.

A: It has a modern two-tone design that adds a stylish touch to any space.

A: Thanks for your interest in our U Brands Pin-It Frame Board! This board is able to be mounted vertically with the mounting hardware included.

A: Thanks for your interest in our U Brands Pin-it Frame Dry Erase Board! This board weighs about 2.5lbs.

A: Hi Jerry, Thanks for your interest in our U Brands Pin-it Frame Magnetic Dry Erase Board! This board does not come with Velcro strips included, though many Velcro strip attachments can be used for mouting.