Graco SlimFit 3-in-1 Convertible Car Seat - Jarret: Multi-Position Recline, Forward/Rear Facing, Machine Washable, Cup Holder

A: Thanks for your interest in our products! The Slim Fit 3 in 1 can be installed using the inright latch system, or the seat belt of vehicle. We hope this helps! Graco team

A: Are you sure they’re definitely fixed? We have the same issue in our Sienna and there is a tiny keyhole slot on the side of the base (the base where the pins slide in). If you stick something in there they come out completely. I used a kabob skewer but a small flathead screwdriver might work.

A: Thank you for your interest in our products! Our SlimFit 3 in 1 car seat is 25.5'' H x 21.5'' D x 19.9'' W. If you need help installing your car seat, please reach out to a local certified Certified Child Passenger Safety Technician (CPST) for assistance. This is a free service, one can be found in your area at: https://www.nhtsa.gov/equipment/car-seats-and-booster-seats#inspection-inspection We also have CPSTs available to help if needed, please contact us at 800-345-4109 Monday-Friday 8:00-5:00 EST and choose option 2.

A: I use 2 of these in the back of my Dodge Challenger that has headrests that don't come out and i just go over them and it works fine.

A: Thanks for reaching out, we appreciate your interest in our products! Due to the grow-with-baby features, the SlimFit 3-in-1 Car Seat doesn't have a removable carrier or separate base. This seat can be installed using your vehicle seat belt or the included InRight™ LATCH system. We hope this helps!

A: It would probably be easiest to have two of them, but that's not financially feasible for everyone. I will eventually be buying 2 so we don't have to worry about switching between cars. It's really just personal preference.

A: I found it easier to purchase a second car seat for my 2 cars. The struggle of constantly moving the seat is not worth it.

A: There also is the slimfit 3 in 1 LX which is even slimmer

A: Thanks for your interest in our products! The SlimFit 3-in-1 Convertible car seat is designed with a slimmer profile to help save space, but fitting 3 across in the backseat of a crew cab pickup like a Silverado 2500 depends on a few factors. The dimensiond of the SlimFit is approximately 19.75" wide per seat. For 3 across you'd need at least 59.25" inches of usable width, allowing for proper installation and clearance. - Graco Team

A: How can we request a car seat purchased after 6/30/25 as opposed to one manufactured before this date?

A: Thank you for your inquiry! Parents and caretakers may check the manufacturing date of the car seat to determine if a Graco car seat meets the new side impact rules. All car seats (excluding belt-positioning boosters) manufactured after June 30, 2025, pass testing to these new standards. All Graco car seats manufactured before this date have undergone rigorous side impact testing to our internal standard and are safe and meet all the regulations and standards active on the manufacturing date. We hope this helps! - The Graco Team

A: Thanks for your interest in our products! The safety of our products and the consumers that use them is our greatest priority. As a juvenile products manufacturer we are subject to strict regulations including a requirement for car seats to meet the US mandatory federal flammability requirement for the interior of vehicles. We can confirm Graco car seat products do contain a flame retardant additive in order to meet this flammability requirement, and that any flame retardant additive utilized in our products meets or exceeds relevant regulatory standards. -Graco Team

A: Thank you for your interest in our products! Graco allows the use of vehicle seat covers as long as they don’t interfere with a secure car seat installation. Your seat shouldn’t move more than 1 inch front‑to‑back or side‑to‑side when checked at the belt path. We don’t have a specific cover to recommend, but you’re welcome to use one that meets these guidelines. We hope this helps! - The Graco Team

A: Thanks for your interest in our products! Don't have the exact diameter, but the cup holder is at least 3 inches. -Graco Team

A: Thanks for your interest in our products A seat protector can be used under the SlimFit 3-in-1 car seat as long as you can acheive a secure installation that moves less than 1" front- to -back or side- to - side. We hope this helps! -Graco Team

A: Thank you for your interest in our products! The SlimFit 3‑in‑1 Convertible Car Seat has two forward‑facing recline positions. These positions are designed to help ensure the seat is level during installation. The recline cannot be adjusted once the seat is installed, and the product isn’t intended for sleeping. We hope this helps! - The Graco Team