Safety 1st Easy Install Tall & Wide Walk Through Baby Gate 29"-47", Décor

A: Hi there! Thank you for your question. Yes, the gate can swing either direction. The gate also features a stopper at the bottom, so when engaged on either side you can stop the gate from going one direction or the other, then disengage to allow the gate to swing either way.

A: Hello there. Thank you for your question. The instructions will very clearly show different widths and which extensions to use. One does state for openings up to 41" you will need one small and one medium extension (extensions included).

A: Hello. This model is made for and tested in openings from 29”– 47” wide.

A: Hello. We do not recommend using from banister to banister, as the gate would need a solid flat surface on both sides to achieve the proper pressurization to install securely. We do not manufacture a kit and do not recommend using any aftermarket kits as they are not safety tested with our gate.

A: Hello. Yes, this model should stand open if desired (the auto-close models would not).

A: Hello. Our gates meet and exceed regulations in order to be on the market. We manufacture a variety of gates to meet various consumer needs, like pressure mount or hardware mounting options.

A: Hello there. With your opening being over the 47", we cannot ensure this gate will work in your space as it is measured and tested up to 47".

A: Hi! The width of the pressure bumper is approximately 1.5 inches.

A: Hi! Since your opening is up to 41 inches, you would use the included small and medium extensions for the gate. With the small and medium extensions specifically being used for openings up to 41 inches and the pressure bumpers turned to proper tightness, the gate should be secure in your space.

A: Hello there. We are unsure which part you are referring to exactly, however, the 'pass-through' portion of the gate is approximately 21.25 inches and the bars are approximately 2.5" apart. We hope this helps.