Keurig K-Mini Go Single-Serve K-Cup Pod Coffee Maker Gray: Compact Electric Brewer, 12 oz Capacity, Uses K-Cups & Pods

A: I've tried several reusable pods and they just do not work with this machine. Customer service tells you to brew it without the adaptor removed but that makes a mess.

A: The "Universal My K-Cup" does indeed work with the K-Mini Go. Just remember to remove the gray 2.0 adapter on the My K-Cup first, and also the standard K-Cup pod receiver in the machine itself.

A: can you make cold coffee with this machine?

A: Ohh! Tt5hh Husband just;!

A: Ohh! Tt5hh Husband just;

A: Please read the answer posted on 5/21/24 about this same question. That person offered a potential solution to this issue.

A: I live in the country I have well water has anybody had trouble using well water that it makes the machine quit in just a few months

A: Thank you for your question. The K-Mini Go is compatible with the Keurig My K-Cup Universal Reusable Filter with MultiStream Technology. We hope this helps!

A: Use the Keurig My K-Cup Universal Reusable Filter with MultiStream Technology. To use this filter, you first have to remove the black insert that allows normal K cups to fit into the machine.

A: The Keurig My K-Cup Reusable Coffee Filter 3.0 is NOT compatible with this machine. I did remover the K-Cup pod receiver as instructed and it still does not fit. Will see if the 2.0 version works.

A: The Keurig My K-Cup Universal Reusable Filter with MultiStream Technology does not fit this machine. I am not sure why this Keurig 'expert' recommended it. My machine will not close with it.

A: Manual says can set the default setting to strong brew mode permanently by holding down the button until it flashes. Tred this several times, but I still have to press STRONG for each cup brewed

A: First day after purchase. Brew lights and strong light never comes on.

A: Thank you for your question. The K-Mini Go coffee maker does have a Strong Brew Mode. It features a STRONG button, which can be selected before or right after choosing the cup size. This option allows for a bolder cup of coffee by increasing the brew time. We hope this helps!

A: I think the purple reusable filters you mentioned are called "Perfect Pod". I use these myself, and where the bottom "pin" would normally have an open space for the pin to fit without damaging it, the entire bottom space is open, so no precise positioning required.

A: It works fine with the K-Mini Go. Just remember to first remove the gray 2.0 adapter on the My K-Cup, and also the K-Cup receiver inside the machine. The My K-Cup works great.

A: This uses compatible reusable kcups. I tried the one in stores and it does not. But I ordered some online and theyre perfect. Theyre purple

A: We are sorry to hear that you are experiencing an issue with your Keurig My K-Cup Universal Reusable Filter. This accessory is compatible with all current Keurig models, including the K-Mini Go coffee maker. Please make sure that you are removing the 2.0 adaptor from the bottom of the accessory and the pod holder in your brewer. If you are still unable to fit it correctly, please reach out to our Consumer Care team for further assistance. Our team is available seven days a week from 7A to 10P EST at 866-901-2739. We hope this helps!

A: This model does not have a Power button, so the instructions above do not work. I tried to do everything as above, but the Descale light is still lit. How do I get into Descale Mode without a Power?

A: Thank you for your question! STEP 1: Prepare the Brewer. Pour the entire bottle of Keurig® Descale Solution into an empty water reservoir. Then, fill the empty bottle with water and pour into the water reservoir. Do not insert a K-Cup® pod. Place a large mug on the drip tray. STEP 2: Descale the Brewer. To activate Descale Mode, begin with the brewer plugged in and powered off, then press and hold the 8oz and 12oz buttons together for 3 seconds. When flashing, press the brew button to start the descaling process. Once the brew is complete, pour the hot liquid into the sink. Repeat this step until the ADD WATER light illuminates. STEP 3: Fresh Water Rinse. Empty the water reservoir and refill to the MAX fill line with fresh water. When flashing, press the brew button to start the rinsing process. Once the brew is complete, pour the hot liquid into the sink. Repeat this step until the DESCALE notification turns off. The brewer has now exited Descale Mode and will be ready for use! You can find many helpful videos on the Support page of the Keurig website. If you need further assistance, please call our Consumer Care team at 866-901-2739, we will be more than happy to help.

A: I have the same problem. I have to run one or two cups of plain water through after making a cup of coffee to clear the grounds. Frustrating.

A: Hi Deb, this certainly doesn't sound right! We recommend reaching out to our Consumer Care team at 866-901-2739. We are here to help!

A: The K-Mini Go Coffee Maker does not contain a mug sensor. We hope this information is helpful.

A: It turns on when you open it, and shuts off a few minutes after you close it (after brewing your coffee of course)

A: Thank you for your question Sheila. The auto off feature sets the K-Mini Go coffee maker to turn off 5 minutes after the last brew for energy savings. We hope this information is helpful!

A: I bought the optional Tall Handle Water Filter Kit and it works perfectly in the K-Mini Go. Brilliant.

A: Thank you for your question. The K-Mini Go coffee maker is compatible with the Keurig Tall Handle Water Filter Starter Kit, which snaps into place at the base of the water reservoir. We hope this helps!

A: Nope, it does not. It does get hot just not as hot as the larger models.

A: Thank you for your question. The Keurig K-Mini Go has a preset brew temperature of 195°F, with the "in cup" temperature averaging around 165-170°F. We hope this helps!

A: Absolutely! Just lift and lower the handle without inserting a K-Cup pod and choose your cup size. The K-Mini Go will simply brew out hot water. We hope this helps!