A: This clock does not have white noise or other sound features.
A: No, it's not designed to mount to a wall. The buttons to operate it are on the back and the power plug extends from the back so it would not be a good candidate even for a DIY wall mount unless it was maybe sitting on a small shelf!
A: Thanks for your interest. You can use two AAA batteries to backup the time and alarm settings and save them either when there is a power failure or the clock is unplugged. When power is restored, the time and alarm settings will be restored so that you don’t have to reset them again. This can be helpful for example if you need to unplug the clock to move it or if the power is briefly interrupted during the night, the backup feature will ensure that the time and alarm are correct so that you’re still woken up in the morning. If the clock doesn’t have from then outlet, however, the display will be off and the alarm will not sound. Since the digits light up and there’s a nightlight, the batteries would drain quickly if the clock was running on battery power.
A: Hi. You cannot set the green light for different times on different days unfortunately : (
A: Hi, This clock is 110V. Thanks
A: The green light will stay on for 3 hours.
A: Yes. The wake up light does not have any alarm sound. The alarm is set separately if you want an alarm as well. If you have any other questions, you can also email as support@hellocapello.com.
A: Hello. Yes you can change the brightness of the night light. On the back, the 2 buttons on the right (that say HR and MIN on the button) are labeled above "BRIGHTNESS". The HR(-) button will make the night light dimmer and the minute (+) button will make it brighter.
A: The backup battery saves the time and alarm settings in the case that there's a power outage or if the clock is unplugged and moved. When power is restored, the time and alarm settings will be restored so that you don’t have to reset them again. This can be helpful for example if you need to unplug the clock to move it or if the power is briefly interrupted during the night, or your kids unplug the clock! The backup feature will ensure that the time and alarm are correct so that the alarm will still work in the morning.
A: When you're setting the time or an alarm, press the hours button and it will cycle from 1-12 AM and then PM. On the display next to the time it will show if it's set to "AM" or "PM".