Graco SlimFit 3-in-1 Convertible Car Seat - Silas: Rear & Forward Facing, 65lbs Max Weight, 23.96lbs Weight

A: Thanks for your interest in our products! The Slim Fit 3 in 1 can be installed using the inright latch system, or the seat belt of vehicle. We hope this helps! Graco team

A: Are you sure they’re definitely fixed? We have the same issue in our Sienna and there is a tiny keyhole slot on the side of the base (the base where the pins slide in). If you stick something in there they come out completely. I used a kabob skewer but a small flathead screwdriver might work.

A: Thank you for your interest in our products! Our SlimFit 3 in 1 car seat is 25.5'' H x 21.5'' D x 19.9'' W. If you need help installing your car seat, please reach out to a local certified Certified Child Passenger Safety Technician (CPST) for assistance. This is a free service, one can be found in your area at: https://www.nhtsa.gov/equipment/car-seats-and-booster-seats#inspection-inspection We also have CPSTs available to help if needed, please contact us at 800-345-4109 Monday-Friday 8:00-5:00 EST and choose option 2.

A: I use 2 of these in the back of my Dodge Challenger that has headrests that don't come out and i just go over them and it works fine.

A: Thanks for reaching out, we appreciate your interest in our products! Due to the grow-with-baby features, the SlimFit 3-in-1 Car Seat doesn't have a removable carrier or separate base. This seat can be installed using your vehicle seat belt or the included InRight™ LATCH system. We hope this helps!

A: It would probably be easiest to have two of them, but that's not financially feasible for everyone. I will eventually be buying 2 so we don't have to worry about switching between cars. It's really just personal preference.

A: I found it easier to purchase a second car seat for my 2 cars. The struggle of constantly moving the seat is not worth it.

A: I have had this car seat for years as mine is now 6 years old, and the transition from rear facing to forward facing seems daunting at first, but with practice it’s super simple. You will have to completely take the car seat out to turn it around and properly attach it each time. You got this!

A: Thank you for your interest in our products! The SlimFit 3‑in‑1 is designed to grow with your child and is easy to adjust as they move through each stage. The maximum weight for rear‑facing mode is 40 lbs, so a three‑year‑old will need to transition to forward‑facing soon. We hope this helps! - The Graco Team

A: Thank you for your inquiry on the Slimfit 3in1 Car Seat! Rear facing use is: 5-40 lb. Harness straps must be at or just below the top of child’s shoulders and chest clip must be at armpit level. We hope this helps! - The Graco Team

A: If they are all legs, then maybe not. But the answer that Graco gave is the best advice. They can’t specifically tell you yes or no due to liability reasons I’m sure. My kids all hit the weight limits before the height limits so I was never in that position. However, mine did start to cross their legs when sitting rear facing before I turned their seats around.

A: There also is the slimfit 3 in 1 LX which is even slimmer

A: Thanks for your interest in our products! The SlimFit 3-in-1 Convertible car seat is designed with a slimmer profile to help save space, but fitting 3 across in the backseat of a crew cab pickup like a Silverado 2500 depends on a few factors. The dimensiond of the SlimFit is approximately 19.75" wide per seat. For 3 across you'd need at least 59.25" inches of usable width, allowing for proper installation and clearance. - Graco Team

A: How can we request a car seat purchased after 6/30/25 as opposed to one manufactured before this date?

A: Thank you for your inquiry! Parents and caretakers may check the manufacturing date of the car seat to determine if a Graco car seat meets the new side impact rules. All car seats (excluding belt-positioning boosters) manufactured after June 30, 2025, pass testing to these new standards. All Graco car seats manufactured before this date have undergone rigorous side impact testing to our internal standard and are safe and meet all the regulations and standards active on the manufacturing date. We hope this helps! - The Graco Team

A: Thanks for your question! If you're looking at a Graco seat with the InRight LATCH system, that's not a separate base. InRight LATCH is simply Graco's push-button attachment system that connects the car seat to your vehicle's lower LATCH anchors. It's designed to make installation quicker and easier. As for moving the seat between cars It's absolutely possible, but with twins and two car seats, moving convertible seats back and forth can become a hassle pretty quickly. We hope this information helps you determine if this car seat is a good fit for you family. - Graco Team

A: Thank you for reaching out. We're sorry to hear your little one seems uncomfortable. The crotch buckle length is not adjustable, so it cannot be lengthened. If additional support is needed, we recommend placing a small rolled washcloth between your child and the harness buckle to help improve comfort and positioning. Before adding the washcloth, please ensure the harness is properly tightened and passes the pinch test. Once the harness is correctly adjusted, the rolled washcloth may be placed between your child and the harness buckle. Please reach out to us, if you have additional questions or concerns. - The Graco Team

A: Rear-Facing Footprint Measurements (Fully Reclined) • Horizontal measurement from the back of the seat across to the top of the car seat: 32 inches . • Diagonal measurement from the bottom of the car seat up to the top of the seat, making contact with the simulated front vehicle seat: 31 inches. These measurements should provide a good estimate of the rear-facing footprint and the amount of space the car seat occupies front-to-back when installed in a vehicle. -The Graco Team