BLACK+DECKER BD145WT6 14,300 BTU Window Air Conditioner Unit, AC Cools Up to 700 Square Feet, Energy Efficient, White

A: Yes — most BLACK+DECKER Window Air Conditioner models do have drain holes/slots built into the bottom of the unit so that condensation and rainwater can drain out once the unit is installed and tilted slightly downward toward the outside. This prevents water from pooling inside or flowing back into your room. You must make sure the drain holes or slots are not blocked, painted, caulked shut, or obstructed by a storm window when installing it, otherwise water can’t drain properly.

A: If your BLACK+DECKER window air conditioner remote only turns the unit off but not on, it’s often due to weak or incorrectly installed batteries, interference or blockage between the remote and the unit’s sensor, or a control lock feature activated on the AC. It could also be caused by a malfunctioning remote, sensor issues, or a built-in time delay that prevents immediate restarting after shutdown. Make sure the unit is properly powered, the remote batteries are fresh, and try turning the AC on manually to isolate the problem.

A: Hello, To keep your BD05MWT6 running efficiently, we recommend cleaning it regularly. Always unplug the unit before cleaning. To clean the air filter, slide it out from the front right side of the unit. Wash it gently with warm water (not exceeding 40°C / 104°F) and mild dish soap, then rinse and shake off excess water. Let the filter dry completely before reinstalling. Never run the unit without the air filter in place, as this may cause frost buildup on the cooling coils. For the cabinet and front panel, you can wipe them with a soft cloth dampened in a mild soap and warm water solution. To clean more thoroughly, you may remove the front panel by gently releasing the side clips or screws, if applicable. Avoid using harsh cleaners, wax, or polish, and make sure no excess water gets into the control area. Dry everything thoroughly before plugging the unit back in. Let us know if you need a step-by-step guide or further assistance!

A: Hi, thank you for your question! The manufacturer doesn’t list the exact width of the louvers on the BLACK+DECKER window air conditioners, but they typically span most of the front grille, just slightly narrower than the unit itself. Depending on the model, the unit width ranges from about 18.5″ to 21.5″, so the louvers are generally just under that. If you can provide the exact model number, I’d be happy to look into more specific details for you.

A: The BLACK+DECKER BD08WT6 8,000 BTU Window Air Conditioner is designed to fit windows ranging from 23 inches to 36 inches in width and at least 14 inches in height. For the BLACK+DECKER BWAC14WTB 14,000 BTU Window Air Conditioner, the recommended window dimensions are 26 inches to 36 inches in width and at least 16 inches in height.

A: Dear customer, Please see below unit dimensions: Unit Dimensions (WxDxH): 18.6" x 17.32" x 13.31"

A: Hi! Yes, you can. Best Wishes.

A: Hi there, You can use the fan mode which will just cyrculate the air in the room and from the outside. All the best!

A: No, there are no vents on top of the unit

A: The front cover flips down to remove the filter.