Graco Turn2me 3-in-1 Rotating Convertible Car Seat - London: Latch Compatible, No-Rethread Harness, Machine Washable

A: no it stays in the car

A: It is not detachable like most car seats. We had to bring the whole thing in when getting sent home from the hospital, it is not easy to move around with but is helpful for spinning in the car to get baby in the car seat.

A: Thank you for your interest in our products! The Turn2Me 3-in-1 Rotating Car Seat is designed to remain installed in your vehicle. Unlike infant car seats, it does not detach from the base. We hope this helps! - The Graco Team

A: there is not a stroller compatible with this. it stays in the car.

A: If this question is referencing the turn2me 3 in 1 carseat, the seat is not meant to be removed from vehicle once installed, hence no such thing as a stroller compatibility. If this is a real question, 😳 the future looks bleak!

A: Thank you for your interest in our products! The Turn2Me 3-in-1 Rotating Convertible Car Seat is not compatible with strollers. We hope this helps! - The Graco Team

A: Thanks for your interest in our products! All Graco car seats (excluding backless boosters) manufactured before June 30, 2025 have undergone rigorous side impact testing to our internal standards and are safe ans meet all the regualtions and standards active on maufacturing date. - Graco Team

A: Yes! I have this in my 2021 4 door with no issues. I leave it turned when she's not in it for more front seat side

A: Thank you for your interest in our products! All our car seats fit in most US vehicles. The Turn2Me is ‎20.75 x 19.13 x 24.4 inches. Please reference the car seat manual and your vehicle owner's manual for information about how to safely install car seats in your specific vehicle. – The Graco Team

A: Usually it’s by 11 pounds in most Graco seats

A: Thanks for reaching out! The infant inserts for the Turn2Me 3-in -1 Rotating car seat must be used together. Use only in rear facing position. . Body support must be used if shoulders are below the lowest harness setting. If shoulders are abouve the lowest hasrness setting they can be removed. We hope this helps! Graco Team

A: You can turn the car seat whenever you need to get your toddler in/out of it, it is very easy compared to other car seats. The only time it must remain locked in rear or forward facing is when the car is moving with the child in the seat. You can leave the seat turned any way if child is not in it to allow extra room.

A: Thanks for reaching out! The Turn2Me turning function is only able to be used when the car seat is rear facing, to make it easier to get baby in and out of the vehicle. Thanks! - The Graco Team

A: Thanks so much for checking in! The Graco Turn2Me 3‑in‑1 Rotating Car Seat is a full‑size all‑in‑one seat, and while it fits in many compact vehicles, the Fiat 500 Pop has one of the smallest back seats on the market, so fit can be tight. -Graco Team

A: Thanks for reaching out! To attach the cup holders, slide the hook on the cup holder into the slot in the seat, then rotate the bottom of the cup holder down until you hear a “CLICK!”. If the cup holder comes out after you hear the click, the hook may be damaged. -Graco Team

A: No, the Turn2Me 3-in-1 can only be installed using one or the other.

A: Thank you for your interest in our products! The safety of our products and the consumers that use them is our greatest priority. We can confirm Graco Turn2Me car seat does contain a flame retardant additive in order to meet this flammability requirement, and that any flame retardant additive utilized in our products meets or exceeds relevant regulatory standards. We hope this helps! - The Graco Team