Monster Jam Grave Digger RC Monster Truck 1:64 Scale

A: Yes of course it can, it's a Monster truck, Made for rough terrain like dirt!

A: Hello Izzy, Thank you for your question on the Monster Jam Grave Digger RC Monster Truck 1:64 Scale! Please note this is meant to be played with indoors only. We hope this helps!

A: Hello David, Thank you for your question! Please note that the body of the Monster Jam Grave Digger RC Monster Truck 1:64 Scale is made of plastic. We hope this helps!

A: The 1:64 scale Monster Jam Grave Digger RC Monster Truck is made primarily of plastic.

A: The package includes the monster truck, controller, ramp, USB charging cable, and an instruction guide.

A: This Monster Truck is suitable for children aged 4 years and up.

A: You can perform epic stunts and back flips using the included ramp.

A: The truck comes with a dual-joystick controller featuring a 2.4 GHz frequency for better control.

A: The remote control has a maximum range of up to 250 feet.

A: Hi Annette, Thank you for sharing your experience with your Monster Jam Grave Digger 1:64 Scale RC. We’re sorry to hear it is not functioning as expected. We recommend trying the following: Ensure that your truck is fully charged. Please also ensure there are 2 fresh, premium alkaline AAA batteries installed in your controller (there is no on button on the controller). Then, switch the power button on the bottom of the truck to ON. Once your truck is turned on, the remote control should automatically connect with your truck! If you are still experiencing the issue after attempting the suggested troubleshooting steps, we would be grateful for the opportunity to turn this into a positive experience for you. Please contact our Customer Care team at 1 800-622-8339 so that we can learn more and provide additional support. We look forward to speaking with you! Regards, Spin Master Customer Care

A: Hi Bard, thank you for your question! To assemble the ramp for your Monster Jam Grave Digger RC Monster Truck we suggest trying the following steps. 1. Remove the two green plastic ramp frame pieces from box 2. Bend the cardboard to match the curve of the ramp 3. Insert one edge of the cardboard so that the notch lines up with the tab of the frame 4. Repeat with the other side of the ramp 5. Push ramp up against a stable object, like a wall or furniture before attempting stunts Note: If having issues with the cardboard, make sure to gently bend the material into a curve before pushing into the frame. We hope this helps!