Safety 1st Lever Handle Lock - 4pk

A: Hello, thank you for your question! We recommend waiting 24 hours as per instructions for use to allow the adhesive to properly secure the product in place prior to use

A: Do yall provide new sticker glue to be able to reuse handle

A: Hello! This is an adhesive-mounted lock, so to remove we recommend using dental floss or fishing line between the adhesive and the door in a sawing motion to cut adhesive away from the lock. Remaining adhesive residue can be rolled off the door with your fingers. If you wish you can briefly run a hair dryer on low heat over the lock to help soften the adhesive before removal.

A: Hello. This is not meant to be used for exterior doors as safety precaution (house fire for example).

A: Hello there. This is one lock. If you need more you will need to purchase the amount needed.

A: Hello! This lock has not specifically been tested with animals but it has been tested to withstand up to 46 lbs of pressure for 10 seconds.

A: The Lever Lock is specifically designed for use with an interior door. We could not guarantee how the lock will work in a moist environment, like a bath tub, or that the size would fit a bath tub lever securely. We would not recommend using it with a bath tub lever.

A: The lock is only able to be disengaged from the side of the door that the lock is installed on.

A: Hello. This lock only allows the handle to open in one direction, only up or down depending on how it is installed

A: Hello. If the wood is not chipped and if it does not have peeling paint, the adhesive should come off without a problem

A: Hello. We do not recommend using the Outsmart Lever Handle Lock on any exterior doors.