Some listings are concentrated solutions that you dilute with water before use; the label or product instructions give the exact dilution and mixing steps. Other listings show ready-to-use (RTU) trigger bottles that can be topped up with a separate concentrate refill. The practical effect is the same cleaning chemistry after following the product’s directions; concentrates reduce shipping/packaging and may lower cost per use. Always follow the manufacturer’s dilution and refill instructions and safety guidance on the label.
Common application methods vary by product type:
- Spray/foam cleaners: spray onto the surface, let the foam or spray dwell briefly to penetrate soils, then wipe or rinse away.
- Cream cleansers: squeeze or apply the cream to stains, rub with a sponge or cloth, then rinse.
- Ready-to-use liquids: simple spray-and-wipe or spray-and-rinse routines with relatively short dwell times are typical.
Follow the specific directions on each product label for best results and safety.
The listings show common sizes such as 16 fl oz, 26 fl oz (26 oz), 32 fl oz (US), and 36 ounces.