O-Cedar H2prO Flat Mop System

A: No thats what i love about this one. The water tank isnt part of the bucket where your mop can even go into. This water tank actualy has a pump. And as you push your mop down the pump sprays clean water from the tank onto the mop head! The rest of the bucket just collects the overspray. And the water you rinse out in the squeegee section.

A: No thats what i love about this one. The water tank isnt part of the bucket where your mop can even go into. This water tank actualy has a pump. And as you push your mop down the pump sprays clean water from the tank onto the mop head! The rest of the bucket just collects the overspray. And the water you rinse out in the squeegee section.

A: H2prO is the only flat mop system to completely separate clean and dirty water, thanks to its innovative two chamber design. When inserting the mop into the first chamber, powerful water jets thoroughly soak the mop pad for a fresh clean start. Then, dirty water is wrung out into a separate tank. So you’re mopping with clean water, every time. Hope this helps!

A: Thanks for reaching out! To answer your question: the O-Cedar H2prO is made in Thailand, and the H2prO mop head replacement is made in Vietnam. We work with trusted manufacturing partners around the world to ensure every part of our products meets the high standards you expect from O-Cedar.

A: Unfortunately only one. For that price point I was expecting atleast 2.

A: Hello RosieRose, there is one mop head included in the H2Pro Flat Mop system.

A: Hello, To answer your question yes the mop pas are washable and can be put in the washing machine without bleach or fabric softener and air dry. If you have any more questions, we are here to help!

A: Hi Yeppi, the H2prO water tank holds up to 1.2 liters of water when filled to the max line. That’s enough to clean up to 650 sq. ft. of floor space! For best results, we recommend filling the tank with water first, then adding 1–2 teaspoons of your preferred cleaning solution. Hope this helps!

A: Hi! You we always recommend choosing a cleaner that is specifically suited for your flooring type. Please be sure to properly dilute the solution. We recommend using 1–2 teaspoons of a common household floor cleaner mixed with water in your clean water tank. We hope this helps!

A: The H2prO can be used with tap hot water, but make sure it’s not boiling! This way, you get an effective clean without any risk to your floors or the mop. Happy cleaning!

A: Hello Leveli, to answer you question yes, you can use distilled vinegar in your H2Pro. The great thing about the H2Pro is that you can choose your own solution (only 2 teaspoons needed) added once the clean water tank is full to avoid filling the tank with bubbles.

A: The great thing about the H2Pro is that you can choose your own solution (only 2 teaspoons needed) added once the clean water tank is full to avoid filling the tank with bubbles, we also recommend checking with your floor type to see what would be the best cleaning solution .

A: Hi Don, we don’t recommend using PACS with the H2prO, as they will not fit through the opening of the water tank and will result in too high of concentration. It’s best to stick with mixing with a liquid cleaner for optimal performance. PACS is best used with a mop and bucket system.