Shark Detect Ultralight Corded Stick Vacuum HZ752 8" Cleaning Path Green

A: Yes, the brush roll on the Shark Detect Pro/Detect Ultralight is designed to be easily accessible, though you may need a small tool such as a coin or screwdriver to open the cover.

A: Does this come with a HEPA filter?

A: What power is the motor

A: This unit has a wattage of 680, an amperage of 5.67 amps, and a voltage of 120 volts.

A: The Shark Detect Ultralight comes with a 5 year warranty.

A: The Detect UltraLight includes a Crevice Tool, Upholstery Tool, Precision Duster, and an Onboard Storage Clip.

A: Yes, the Detect UltraLight is designed to clean bare floors like hardwood with ease. Use the Bare Floor setting by sliding the Floor Select button to setting I. The brushroll spins slowly in this mode, making it suitable for picking up dust and debris on hardwood.

A: To wash the filters on your Shark Detect vacuum, first remove the dust cup by pressing the two release latches and sliding it off the handheld vacuum. Take out the pre motor foam and felt filters from the filter housing, rinse them with cold water only, and allow them to air dry for at least 24 hours before reinstalling. To clean the post motor filter, open the filter cover located beneath the Shark badge, rinse the filter with cold water, and let it dry completely before placing it back in the vacuum.

A: The HZ752 is less likely to get tangled thanks to its self-cleaning brushroll, but it may pull up lightweight area rugs due to strong suction.

A: Yes, the Shark Detect Pet vacuum performs well on low‑pile carpets. For best results, use Carpet Setting II by sliding the Floor Select button to setting II, which increases brush roll speed to lift debris from below the surface. Gently step on the floor nozzle and tilt the vacuum back to activate the fast‑spinning brushroll, and this setting can also make the vacuum easier to push, even when transitioning to thicker carpeted areas.

A: For assistance locating attachments for your Detect UltraLight, please contact our Shark support team so we can help identify and order the correct accessories for your unit. You can contact us at 1‑855‑427‑5127, available Monday to Friday from 9 a.m. to 9 p.m. ET and Saturday from 9 a.m. to 6 p.m. ET.

A: To clean the roller on your Detect Ultralight, continue vacuuming on a bare‑floor surface using Setting I (Carpet mode), and the brushroll should clear the hair automatically. If any hair remains, you can open the bottom of the floor nozzle and carefully remove the hair from the brushroll manually.