Sponsored
1.0 fl oz Glue with Precision Tips Clear - E6000: Water-Resistant Craft Adhesive, Dries Clear, Ideal for Shoes & Art Projects
In Stock
Sponsored
About this item
Highlights
- Dries clear
- Permanent bond
- Waterproof
- Paintable
- Flexible
- Washer/dryer safe
- Use on metal, wood, fabric, glass, ceramic, polymer clay and more!
Description
Shipping details
Return details
Q: Can it be used to glue sneakers
A: E6000 does a great job repairing sneakers and other footwear. It bonds well with rubber and other shoe materials and will flex with the shoe while in use. Just be sure to clean the surfaces with rubbing alcohol before applying and clamp the repair in place for 24 hours and it should work great. Thank you for your support of Eclectic Products and Target!
submitted byTeam Eclectic - 2 months agoBrand expert
Q: Does this work on leather, gluing 2 pcs of leather together?
A: E6000 does a great job of bonding leather-to-leather. We recommend cleaning the surfaces with rubbing alcohol prior to applying. E6000 works best when it is applied to both surfaces and allowed to be exposed to air for 1-2 minutes before mating the two together and clamping/securing with weight for 24 hours. Thank you for your support of Eclectic Products and Target!
submitted byTeam Eclectic - 2 months agoBrand expert
Q: What gauge blunt tips are included with this? I purchased this previously and want to order additional tips, but cannot figure out what gauge the tips are!
A: The tips that are included with E6000 are 14 gauge and they are reusable--try cleaning them out by soaking in a dish of rubbing alcohol. Thank you for your support of Eclectic Products and Target!
submitted byTeam Eclectic - 2 months agoBrand expert
Q: Will this work to fix an outdoor sling chair where the stitching is coming undone?
A: E6000 should do a great job repairing the outdoor sling chair. Clean both surfaces with acetone or rubbing alcohol prior to applying. For best results treat the product as a contact adhesive, meaning apply the product to both surfaces and allow 1-2 minutes for the product to get tacky before mating the two together and clamping/securing with weight for 24 hours. Thank you for your support of Eclectic Products and Target!
submitted byTeam Eclectic - 3 months agoBrand expert
Q: Can I use this to glue a vase that will have water in it at times?
A: E6000 is a great choice for mending a cracked vase. It is fully waterproof upon a full cure and should work great for this application. It is best to clean the surface with rubbing alcohol before applying for a quality bond. Thank you for your support of Eclectic Products and Target!
submitted byTeam Eclectic - 3 months agoBrand expert
Q: How fast does this dry?
A: E6000 is a solvent based adhesive that cures via the solvent evaporating. This generally takes about 24 hours, but can take up to 48 hours if there is little air flow for the solvent to evaporate and fully cure. Thank you for your support of Eclectic Products and Target!
submitted byTeam Eclectic - 5 months agoBrand expert
Q: Can this be used in jewlery making, i.e. sealing the knot on stretchy string on a bracelet?
A: E6000 is a great choice when making jewelry--it dries clear, will flex with the bracelet, and is fully waterproof when it is cured. It should work great to seal the knot and make it secure. Thank you for your support of Eclectic Products and Target!
submitted byTeam Eclectic - 8 months agoBrand expert
Q: Does this glue turn yellow over time? Like if I was to use it to rhinestone a car emblem.
A: E6000 is a clear adhesive but it may yellow over years of being in the sun's UV rays. If the adhesive is covered or painted it will have some added UV protection. Thank you for your support of Eclectic Products and Target!
submitted byTeam Eclectic - 8 months agoBrand expert
Q: Can this glue be used to repair porcelain?
A: E6000 is a great choice for repairing porcelain and it holds very well. Clean both surfaces with acetone or rubbing alcohol prior to applying. For best results treat the product as a contact adhesive, meaning apply the product to both surfaces and allow 1-2 minutes for the product to get tacky before mating the two together and clamping/securing with weight for 24 hours. Thank you for your support of Eclectic Products and Target!
submitted byTeam Eclectic - 10 months agoBrand expert
Q: Can I use this stick patches on beanies, puffer vest and nylon jacket?
A: E6000 works great for adhering patches on clothing. I bonds great with nylon, cotton, and wool, and should flex and move with the garment once fully cured. For best results, apply E6000 to both surfaces and allow 1-2 minutes for the product to get tacky before mating the two together and clamping/securing with weight for 24 hours. Thank you for your support of Eclectic Products and Target!
submitted byTeam Eclectic - 10 months agoBrand expert
Frequently bought together
