Café Ball Curtain Rod - Room Essentials™

Love the way they look in my kitchen with the curtains!

Perfect and affordable !

Thin, yet holds up my curtains—with the help of the large command strips that hold 15 pounds on amazon for 9.57. :) cute color too!

I got a bunch of these, so they could match all around the house, but didn’t want to spend a ton. I got a mix of black and copper when I ordered all black. My husband didn’t notice until he had already installed all of the hardware. It’s not that noticeable, so we are just sticking with it, but check and make sure you get the right color! So far they work fine though.

Drywall anchors do not go in and damage drywall when attempting to. After making the 1/4 inch pilot hole in the directions, it does not tap in or screw in. The anchors are too large and the threads are too dull. If you buy this, you will need to buy your own anchors, or attempt it without any anchors.

I bought the wrong ones. I will have to return them

Cannot adjust the length. It simply doesn’t tighten. Waste of time and money

The quality is not the best I went to go pick it up and one of them was already bent. I'm really disappointed

The curtain rods arrived looking brand new, but to my disappointment, they were completely rusted. This was unexpected and quite frustrating, as rust on new products suggests poor quality or storage issues. I cannot recommend these rods based on this experience.

Great curtain rod. Have bought same rod previously in different finishes. Affordable price. I’m sure to purchase more as needed!!

I like this drapery rod because it has a generous length and the ends are not too big. The finish is a nice semi gloss black.

Love the simple design, but not good for heavy curtains. If you have long/heavy curtains, you will need to buy a more durable rod.

The rod itself is extremely cheap. It's essentially hollow tin and scratches super easily, not to mention when you adjust the rod length it doesn't lock so if you pull it too far by accident the pieces will detach in the middle and fall. Then I tried using the hardware. I drilled the holes and when putting the anchor rods in they make enormous holes in the wall and were unable to take the screws since they just kept going deeper.

faulty wall anchors... i had a horrible time trying to get the drywall anchors in the wall. they simply fell into the wall. never had this happen before with drywall anchors. use different drywall anchors if you go this route! left a lot of unsightly holes in the wall to the fault of the hardware. :( very expensive to justify the purchase as well.

It cost me a lot of time trying to use the provided wall anchors to install the rods. I finally realized the anchors were constructed with an obstruction mid way the length of the anchor, so there was no way a screw would go all the way into the anchor and be flush with the wall. I ended up using my own wall anchors. The 2 pieces of rod do not fit together snugly, so the rod sags in the middle. One of the pieces is much smaller than the other. I thought I would solve the sagging problem by purchasing the 48 - 84" rod, but it is not in stock in stores. Do not waste your time and money on this rod!

I bought this for my babies nursery. It is simple and cute.

Worked perfectly with my self stick curtain rod holders. Looks great! Fancy but not at a high cost.

Technically a “cafe rod” but works great for lightweight, sheer panels too and much lighter than standard rods. Also looks nicer than plastic rod and works well. If you cannot put screws in wall, Command Strips makes curtain rod hooks that work well with this!

The set up were easy to follow. Only issue with the instructions it didn't provide a template for the middle bracket. I'm excited for my curtains to arrive and apply them to the curtain rod.

Easy to put up and very reasonable price.